IS230PCAAH1A GE Mark VIe Core Analog Module

IS230PCAAH1A Core Analog Module – GE Energy Mark VIe Series

Technical Specifications

• Brand: GE Energy
• Model: IS230PCAAH1A
• Series: Mark VIe
• Category: Core Analog Module
• Product Type: Core Analog Module
• Terminal Board: TCAS
• Optional Terminal Board: TCAT
• Signal Type: Input and Output Signals
• Dimensions: 17.71 × 13.77 × 7.87 cm
• Operating Temperature: -30 to +65°C
• Mounting Strategy: Non DIN-Rail Modular
• DIN Rail Installation Hardware: Not Included
• Country of Manufacture: United States (USA)

Supported I/O Types

• Thermocouple inputs for high-temperature measurement
• Analog 4-20 mA current loop inputs and outputs
• Seismic inputs for vibration monitoring
• LVDT excitation and inputs for position sensing
• Pulse rate inputs for speed and frequency measurement
• Servo coil driver outputs for actuator control
• +/- 12 V power output for compatible field devices

Functional Description

• System Modes: The module supports simplex, dual, and TMR (Triple Modular Redundant) configurations. A single TCAT terminal board distributes signal inputs to one, two, or three PCAA modules.
• Power and Grounding Extensions: An adjacent JGPA board's shield ground and 24 V field power terminals supplement the terminals on the PCAA and TCAT.
• Internal Board Architecture: The module includes a BPPB processor board, two application I/O boards, and a TCAS terminal board.
• Serviceability: The entire module is the least replaceable unit (LRU). No support is provided to diagnose or replace individual internal boards.
• Connectivity: The module uses a 28 V dc power connector, two RJ45 Ethernet connectors, and 120 Euro-style box terminals for field device I/O.
• Power to JGPA: Power reaches a JGPA board through connector P4.
• TCAT Connection: Two 68-pin cables on connectors P1 and P2 connect the module to the TCAT.
• Signal Routing: PCAA signals divide into two groups. The TCAT routes signal inputs that can fan from a single input into a single, dual, or TMR PCAA module. Signals dedicated to one PCAA module wire directly to terminals. PCAA can operate without TCAT when fanned inputs are not required.

Processor Features

• Two fully independent 10/100 Ethernet ports with connectors
• Hardware watchdog timer and reset circuit
• Internal temperature sensor for thermal monitoring
• Status-indicating LEDs for quick diagnostics
• Electronic ID and the ability to read IDs on other boards
• Soft start and current limiter on the input power connector
• Local power supplies with sequencing and monitoring

Power Management

• Inrush Current Control: The 28 V input circuit includes power management. A soft start function controls current inrush during power application.
• Disturbance Prevention: After power application, a fast current limit function prevents a power disturbance from propagating back onto the 28 V power system.
• PWR Indicator: The green PWR indicator illuminates when power is present and functioning properly. If the current limit function is enabled, the indicator stays illuminated until the problem is resolved

FAQ

• Q: What is the model number of this GE Energy module?
  A: The model number is IS230PCAAH1A, and it belongs to the Mark VIe series.
• Q: What does this module do in a Mark VIe system?
  A: It provides a large portion of the analog signal I/O required to operate a gas turbine.
• Q: What I/O types does the module support?
  A: It supports thermocouples, 4-20 mA current loops, seismic inputs, LVDT excitation and inputs, pulse rate inputs, and servo coil outputs.
• Q: Which system modes can use this module?
  A: The module supports simplex, dual, and TMR (Triple Modular Redundant) system configurations.
• Q: What is the operating temperature range?
  A: The module operates from -30 to +65°C.
• Q: What terminal board does this module use?
  A: It uses a TCAS terminal board and supports optional TCAT terminal boards.
• Q: How many terminals does the PCAA module have?
  A: The module features 120 Euro-style pluggable box terminals for field device I/O.
• Q: How does the module connect to the TCAT board?
  A: Two 68-pin cables on connectors P1 and P2 connect the module to the TCAT.
• Q: What does the green PWR indicator mean?
  A: The green PWR indicator illuminates when power is present and functioning properly.
• Q: What are the dimensions of this module?
  A: The module measures 17.71 × 13.77 × 7.87 cm.
• Q: Is DIN rail installation hardware included?
  A: No, DIN rail installation hardware is not included with this module.
• Q: Is this item in stock, and how fast do you ship?
  A: Yes, we keep it in stock and ship within 5 days using FedEx, UPS, or DHL.

Contact Information Inquiries: sales@nex-auto.com or +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/