330880-28-15-027-00-02 Bently Nevada PROXPAC XL Transducer

Bently Nevada 330880-28-15-027-00-02 PROXPAC XL Proximity Transducer

Technical Specifications

• Brand: Bently Nevada
• Model: 330880-28-15-027-00-02
• Product Type: PROXPAC XL Proximity Transducer
• Probe and Approvals Option: 2 8 — 3300 XL 8 mm probe with Multiple Approvals
• Standoff Adapter Option (B Dimension): 15 = 1.5 in
• Probe Penetration Option (C Dimension): 027 = 27 mm
• Fittings Option: 0 0 — No fittings; two plugs and two washers
• Mounting Thread Option: 0 2 — 3/4-14 NPT (required with standoff adapter option)
• Weight: 1.44 kg (3.2 lbm) typical with 0.3 metre (12 in) sleeve length
• Linear Range: 2 mm (80 mils) — from approximately 0.25 mm to 2.3 mm (10 mils to 90 mils), about –1 Vdc to –17 Vdc
• Recommended Gap Setting: 1.27 mm (50 mils)
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ±5% including interchangeability error from 0 °C to +45 °C (+32 °F to +113 °F)
• Deviation from Best Fit Straight Line (DSL): Less than ±0.025 mm (±1 mil) for standard 1 metre system at 0 °C to +45 °C (+32 °F to +113 °F)
• Frequency Response: 0 to 10 kHz: +0, -3 dB with up to 305 metres (1000 feet) of field wiring
• Minimum Target Size: 15.2 mm (0.6 in) diameter flat target
• Minimum Shaft Diameter: 50.8 mm (2.0 in)
• Probe Temperature Range: Operating –51 °C to +177 °C (–60 °F to +350 °F)
• Temperature Note: Exposing the probe below –34 °C (–29 °F) may cause premature pressure seal failure
• Power Requirement: –17.5 Vdc to –26 Vdc without barriers at 12 mA maximum; –23 Vdc to –26 Vdc with barriers
• Supply Sensitivity: Less than 2 mV output change per volt input change
• Output Resistance: 50 Ω
• Field Wiring: 0.2 to 1.5 mm² (16 to 24 AWG); recommend 3-conductor shielded triax cable and tinned field wiring
• Maximum Field Wiring Length: 305 metres (1,000 feet) between the 3300 XL Proximitor Sensor and the monitor

Mechanical and Environmental Durability

• Housing Rating: IP66 verified by BASEEFA report number T07/0709
• Probe Tip Material: Polyphenylene Sulfide (PPS)
• Probe Case Material: AISI 304 stainless steel
• Probe Cable: 1-metre length, 75 Ω triaxial, fluoroethylene propylene (FEP) insulated
• Probe Connector: Gold-plated brass ClickLoc* connector
• Probe Tensile Strength: 330 N (75 lb) maximum between probe cable and case
• Housing Material: UV resistant, glass-reinforced polyphenylene sulfide (PPS) thermoplastic with conductive fibers
• Sleeve Material and Retaining Chain: AISI 304 stainless steel
• Outer Sleeve and Retaining Screws: AISI 303 stainless steel
• Sleeve O-Ring Material: Neoprene
• Grounding Liner and Retaining Plate Material: AISI 304 stainless steel
• Vibration Isolation Material: Extra Soft Cellular Silicone
• Lid Label Material: Gloss Radiant White Polyester
• Recommended Torque — Retaining Nut: 29.5 N·m (260 in·lb)
• Recommended Torque — Probe Sleeve Locknut: 39.3 N·m (350 in·lb)
• Housing Strength Typical: Housing supported 912 N (205 lbf) placed about 38 mm (1.5 in) from the unsupported end
• Housing Impact Strength: Certified by BASEEFA for two separate 4 Joule (5.4 ft·lb) impacts at –39 °C (–38 °F) and at 115 °C (239 °F); CSA verified 7 Joule (9.5 ft·lb) impact at ambient room temperature

FAQ

• Is this item new and original? Yes, we supply brand new original products.
• Do you have stock for the 330880-28-15-027-00-02? Yes, we have this model in stock.
• How fast do you ship? We dispatch within 5 days after order confirmation.
• Which carriers do you use? We commonly use DHL, FedEx, and UPS.
• Can I return the product? Yes, we support returns within 30 days.
• What is the linear range of this transducer? The linear range is 2 mm (80 mils), from about 0.25 mm to 2.3 mm.
• What gap setting do you recommend? Set the gap to 1.27 mm (50 mils).
• What is the frequency response? It is 0 to 10 kHz: +0, -3 dB with up to 305 metres of field wiring.
• What is the incremental scale factor? It is 7.87 V/mm (200 mV/mil) ±5% over the linear range from 0 °C to +45 °C.
• What is the probe operating temperature range? The probe operates from –51 °C to +177 °C (–60 °F to +350 °F).
• What power does the system need? It needs –17.5 Vdc to –26 Vdc without barriers and –23 Vdc to –26 Vdc with barriers.
• What is the maximum field wiring length? The maximum length is 305 metres (1,000 feet).

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/