FS-SDOL-0448 Honeywell Safety Controller Chassis
-
Vendor:
Honeywell
-
Type:
Controller Chassis
-
Country of Origin:
USA
-
Dimensions:
20*15*7cm
- Weight:
2800 g
- Tags: Controller chassis
Honeywell FS-SDOL-0448 Control Processor Chassis Introduction
The Honeywell FS-SDOL-0448 is a modular chassis designed to house control processors and I/O modules in safety instrumented systems. It provides the physical and electrical infrastructure for building reliable safety control systems.
Core Technical Specifications
- Manufacturer: Honeywell
- Product Number: FS-SDOL-0448
- Product Type: Control Processor Chassis/Backplane
- System Compatibility: Honeywell Safety Manager SC System
- Safety Certification: Designed for SIL 3 compliant systems per IEC 61508
- Slot Capacity: 4 module slots (supports mix of processors and I/O modules)
- Power Supply: Integrated 48 Vdc power distribution
Electrical & Power Specifications
- Input Voltage: 24 Vdc ±20% (primary power input)
- Backplane Voltage: 48 Vdc regulated (for module operation)
- Power Capacity: Maximum 150 W total power delivery
- Current Capacity: Up to 3.125 A per slot (48Vdc)
- Power Connections: Dual redundant power input terminals
- Power-up Time: ≤ 2 seconds from power application to ready state
- Backplane Bandwidth: 100 Mbps internal communication bus
- Isolation: 1500 Vrms isolation between power input and backplane
Physical & Mechanical Specifications
- Chassis Dimensions: 350 mm × 120 mm × 200 mm (W × H × D)
- Mounting: 19-inch rack mounting (3U height) or panel mounting
- Slot Pitch: 25 mm between module centers
- Connector Type: High-density DIN 41612 connectors (96-pin)
- Cooling: Passive convection cooling (no fans required)
- Weight (empty): 2.8 kg
- Weight (fully loaded): Maximum 5.5 kg
- Material: Powder-coated steel enclosure
- Color: Safety yellow (RAL 1023)
Environmental Specifications
- Operating Temperature: 0°C to +60°C (32°F to 140°F)
- Storage Temperature: -40°C to +85°C (-40°F to 185°F)
- Relative Humidity: 5% to 95% non-condensing
- Altitude Rating: Up to 2000 meters above sea level
- Vibration Resistance: 1 g (5-150 Hz) operational, 2 g (5-150 Hz) non-operational
- Shock Resistance: 15 g, 11 ms half-sine (per IEC 60068-2-27)
- Protection Degree: IP20 (front panel)
- EMC Compliance: EN 61326-1, EN 61000-6-2, EN 61000-6-4
Features & System Integration
- Hot-Swap Capable: Supports module replacement without system shutdown
- Status Indicators: Multi-color LEDs for power, system status, and slot status
- Diagnostic Features: Power monitoring, temperature monitoring, slot detection
- Redundancy Support: Compatible with redundant processor configurations
- Cable Management: Integrated cable routing channels and strain relief
- Grounding: Dedicated chassis ground connection point
- Expansion: Can be linked with additional chassis for system expansion
Installation & Configuration Guide
- Mount in 19-inch rack using provided mounting brackets (included)
- Ensure minimum 50 mm clearance above and below for ventilation
- Connect redundant 24Vdc power supplies to input terminals
- Install modules starting from left slot (typically processor slot)
- Verify all module latches are securely engaged
- Connect chassis ground to facility ground per local electrical codes
- Use torque of 0.6 Nm for all power and ground connections
Packaging & Shipping Information
- The Honeywell FS-SDOL-0448 chassis is shipped in protective foam packaging
- Package includes chassis, mounting brackets, power connectors, and installation manual
- Dimensions: 450 mm × 180 mm × 300 mm (shipping box)
- Shipping weight: 4.2 kg (including packaging)
- Shipped via FedEx, DHL, or UPS with full tracking and insurance
Frequently Asked Questions (FAQ)
- How many modules can it hold? 4 modules maximum capacity
- What power supply is required? 24Vdc input, provides 48Vdc to modules
- Is it rack mountable? Yes, standard 19-inch rack, 3U height
- Can modules be hot-swapped? Yes, supports hot-swap module replacement
- What safety certification? Designed for SIL 3 compliant systems
For technical specifications or to order the Honeywell FS-SDOL-0448 chassis, contact us.
Email: sales@nex-auto.com
Phone: +86 153 9242 9628
Partner NexAuto Technology Limited :
https://www.nex-auto.com/
© 2025 AutoNex Controls Limited. All rights reserved.
Original Source: AutoNex Controls Limited :
https://www.autonexcontrol.com/
Fast & Reliable Shipping
Quick worldwide delivery
keeps your automation projects on schedule.
Genuine & Trusted
All components are 100% authentic
ensuring reliable performance for your systems.
- Express Delivery
- 12 Months Warranty
- 30 Days Easy Returns

Customer Support
Get Help When You Need It Most
Here to Assist Your Automation Needs
Contact us for pricing, product details, or order assistance — our experts are available to help.
Know Your Return Rights
You have 30 days to return a product if it doesn’t meet your requirements. See the full policy for details.














