INNPM01 ABB Network Processing Module INFI-NET Controlway

INNPM01 ABB Network Processing Module – INFI-NET to Controlway Translator

Technical Specifications

• Brand: ABB
• Model: INNPM01
• Category: Network Processing Module
• Memory: 256 kbytes ROM and 512 kbytes RAM
• Power Requirements: +5 VDC at 2 A; 10 W nominal, 10 W max
• Communication Rates: 1 Mbaud (Controlway) and 83.3 kbaud (module bus)
• Mounting: Occupies one slot in a standard INFI 90 module mounting unit
• Weight: 0.45 Kg
• Connector: P1 edge connector with 12 pins

Exception Report Polling

• The NPM module polls control modules within the process control unit for exception reports.
• Control modules generate an exception report when a designated point changes by a significant amount.
• Control modules generate an exception report when the maximum time expires.
• Control modules generate an exception report when an alarm condition changes.
• The poll rate comes from a dipswitch setting on the NPM circuit board.
• You can select poll rates of one, two, four, or eight polls per second.

Status LED and Controls

• Status LED: Shows module power and operating state.
• Stop/Reset Pushbutton: Lets you stop or reset the module.
• Eight CPU LEDs: Display an error code when the status LED turns red.
• Off: No power reaches the NPM.
• Solid Green: The NPM is in execute mode.
• Solid Red: The NPM diagnostics detect a hardware failure or configuration problem.

P1 Edge Connector Pin Assignments

• Pin 1: +5 VDC
• Pin 2: +5 VDC
• Pin 3: Power Supply Status
• Pin 4: Controlway B
• Pin 5: Common
• Pin 6: Common
• Pin 7: Unused
• Pin 8: Unused
• Pin 9: Power Fail Interrupt
• Pin 10: Unused
• Pin 11: Controlway A / Module Bus
• Pin 12: Unused

Installation Guide

• Mount the INNPM01 in one slot of a standard INFI 90 module mounting unit.
• Confirm the +5 VDC power supply meets the 2 A and 10 W requirement.
• Set the dipswitch on the NPM circuit board to choose the poll rate.
• Connect the P1 edge connector to the backplane for power and communication.
• Check the status LED after power-up to confirm green execute mode.
• Review the CPU LEDs if the status LED shows red for a fault code.

Package List

• 1 x ABB INNPM01 Network Processing Module
• 1 x Protective shipping carton
• 1 x Anti-static bag
• 1 x Quick reference packing slip

Shipping and Support

• Stock: We keep this item in stock for fast order handling.
• Dispatch: We ship within 5 days after we confirm your order.
• Couriers: We use FedEx, UPS, and DHL for global delivery.
• Returns: You can return the item within 30 days.
• Condition: The product is brand new and original.

FAQ

• Q: What communication rates does the ABB INNPM01 support?
  A: It supports 1 Mbaud on the Controlway and 83.3 kbaud on the module bus.
• Q: How much memory does the INNPM01 module have?
  A: It carries 256 kbytes ROM and 512 kbytes RAM.
• Q: What power does the INNPM01 need?
  A: It needs +5 VDC at 2 A, with 10 W nominal and 10 W maximum.
• Q: What does the INNPM01 do in the INFI 90 system?
  A: It translates between the INFI-NET loop and the Controlway and routes exception reports.
• Q: How many poll rates can I select on the NPM?
  A: You can choose one, two, four, or eight polls per second via dipswitch.
• Q: What does a solid red status LED mean?
  A: The NPM diagnostics detect a hardware failure or configuration problem.
• Q: What do the eight CPU LEDs show?
  A: They display an error code when the status LED turns red.
• Q: Which pins carry +5 VDC on the P1 connector?
  A: Pins 1 and 2 carry +5 VDC, and pins 5 and 6 carry Common.
• Q: What is the weight of the INNPM01?
  A: The module weighs 0.45 Kg.

Contact Information

Inquiries: sales@nex-auto.com or +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/