TC-PMFO01 Honeywell - ControlNet Fiber Module

TC-PMFO01 Honeywell ControlNet Fiber Module for Hazardous Locations

• Brand & Model: Honeywell TC-PMFO01 – a dedicated fiber module for hazardous location applications.
• Fiber Capacity: Accommodates one fiber module plus one repeater adapter module.
• Power Supply: Draws power through the connected repeater adapter module – no separate input required.
• Bus Interface: Uses a 30-pin male (output) and female (input) connector with vendor-specific TTL bus.
• Electrical Ratings (Output): Uo 5.4Vdc, Io 201mA, Po 1.09W, Lo ≤ 0.45mH, Co 71μF.
• Electrical Ratings (Input): Ui 5.4Vdc, Ii 201mA, Pi 1.09W, Li 15μH, Ci 41μF.

Optical & Communication Specifications

• Fiber Type & Termination: Uses 62.5/125 micron fiber with ST connectors (plastic or ceramic).
• Wavelength & Power Budget: Operates at 1300 nm with a 13.3 dB optical power budget.
• Transmission Distance: Reaches up to 3 km (9,842 ft) – ideal for large industrial sites.
• Communication Rate: Delivers 5 Mbit/s data transfer, fully compatible with ControlNet International Version 1.5.
• Galvanic Isolation: Provides isolation between TTL bus and ControlNet per DIN EN 50 020.

Environmental & Physical Characteristics

• Temperature Range: Operates from –20°C to 70°C (–4°F to 158°F). Stores safely from –20°C to 100°C (–4°F to 212°F).
• Humidity & Gas Resistance: Withstands 95% relative humidity (non-condensing) and passes ISA-S71.04-1985 Pollution Gas Test Level G3.
• Shock & Vibration: Endures 15g peak shock (11 ms) and 2g vibration (10–500 Hz) per IEC 68-2-6.
• Protection Class: Rated IP20 – requires an external IP54 (or better) housing for field installation.
• Weight & Dimensions: Light at 0.139 kg (0.31 lb). Measures 94 x 94 x 87 mm (3.7 x 3.7 x 3.4 inches).
• Certifications: CENELEC II (1) 2G EEx ia/ib IIB/IIC T4; CE marked per DIN EN 50081-2, 50082-2, and NAMUR NE 21.

Frequently Asked Questions

• Is the TC-PMFO01 a new genuine Honeywell part? Yes, we supply only brand-new, factory-sealed units.
• Can I use this module outdoors without extra housing? No – it has IP20 rating and requires an IP54 or better enclosure for field use.
• What fiber cable does it support? It works with 62.5/125 micron multimode fiber with ST connectors.
• Does it provide its own power supply? No – it draws power from the connected repeater adapter module.
• How do I check the link status? The module uses LED indicators on the repeater adapter for fiber link and bus activity.
• Is this module ATEX certified? Yes, it carries DMT 99 ATEX E 036 X and CENELEC II (1) 2G EEx ia/ib IIB/IIC T4.

Contact Information Inquiries: sales@nex-auto.com ， +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/