KV-N14DT Keyence KV Nano All-in-One PLC

KV-N14DT Keyence KV Nano All-in-One PLC – 8 Input / 6 Transistor Output Controller

Technical Specifications

• Brand: Keyence
• Model: KV-N14DT
• Series: KV Nano
• Category: All-in-one PLC (terminal block type)
• Program capacity reaches 8k steps for compact control tasks.
• Basic instruction execution speed starts at 50 ns; application instructions start at 170 ns.
• Program language covers expanded ladder, KV Script, and mnemonic formats.
• Built-in I/O provides 8 input points and 6 output points.
• Positioning pulse output drives 2 axes at a maximum 100 kHz.
• High-speed counter offers 2 points, 32-bit auto-reset, 100 kHz single phase and 50 kHz phase difference.
• Output type is MOSFET transistor (sink/NPN), 30 VDC 0.5 A per point for fast, wear-free switching.

I/O Capacity and Expansion

• The base unit carries 8 inputs and 6 outputs as standard.
• Backplane I/O modules support up to 3 expansion units.
• Total system capacity reaches 128 I/O points, excluding the base unit.
• This layout suits small panels that may grow later.

Communication

• A built-in RS-232C port uses a modular connector.
• Supported protocols include KV STUDIO and no-protocol serial.
• Backplane communication modules add further connectivity options.
• Serial links connect the PLC to HMIs, barcode readers, and sensors.

Electrical Data

• Supply voltage is 24 VDC (+/-10%) nominal for DC control panels.
• Output power supply delivers 24 VDC (+/-10%) at 0.6 A capacity.
• Each transistor output handles 30 VDC at 0.5 A.
• Sink (NPN) wiring matches common Japanese and Asian machine conventions.

Environmental Durability

• Operating temperature spans 0 to +55 °C with no freezing.
• Storage temperature spans -25 to +75 °C.
• Relative humidity stays within 5 to 95% RH with no condensation.
• The housing carries no formal protection rating, so mount it inside a sealed enclosure.
• Transistor outputs contain no moving contacts and resist mechanical wear.

Physical Data

• Weight is approximately 0.42 kg.
• Dimensions are not available in the official data sheet.
• The terminal block type design speeds up field wiring.

Lifecycle Status

• Keyence lists the KV-N14DT as active in official production.
• We last verified this status in September 2026.
• Long-term availability supports spare part planning.

Installation Guide

• Mount the unit on a DIN rail inside a control cabinet.
• Keep clearance around the top and bottom for airflow.
• Wire the 24 VDC supply to the dedicated power terminals.
• Connect inputs and transistor outputs to the terminal block.
• Add a flyback diode when you switch inductive DC loads.
• Route signal cables away from motor and inverter power lines.
• Ground the panel properly to reduce electrical interference.
• Load the program through the RS-232C port using KV STUDIO.

Package Contents

• One Keyence KV-N14DT PLC unit
• One terminal block cover set
• One instruction sheet
• Protective packaging for safe transport

Shipping and Support

• We ship by FedEx, UPS, and DHL.
• We dispatch stock items within 5 days.
• We accept returns within 30 days.

FAQ

• Q: What does the KV-N14DT include? A: The unit is brand new and original, and we hold stock ready to ship.
• Q: How many I/O points does the base unit offer? A: It provides 8 inputs and 6 transistor outputs on the terminal block.
• Q: What output type does this model use? A: It uses MOSFET transistor outputs in sink (NPN) configuration.
• Q: What load can each output drive? A: Each point switches up to 30 VDC at 0.5 A.
• Q: Can I expand the I/O count? A: Yes, you can add up to 3 expansion units for 128 points.
• Q: What positioning speed does it support? A: It drives 2 axes at a maximum pulse rate of 100 kHz.
• Q: What supply voltage does it need? A: It accepts 24 VDC with a tolerance of plus or minus 10%.
• Q: What is the operating temperature range? A: It runs from 0 to +55 °C without freezing.
• Q: How fast do you ship? A: We ship within 5 days by DHL, FedEx, or UPS.
• Q: What is your return policy? A: We support 30-day returns on this product.

Contact Information Inquiries: sales@nex-auto.com or +86 153 9242 9628

Partner: NexAuto Technology Limited