Bently Nevada 330709-000-040-90-02-05 3300 XL Proximity Probe

330709-000-040-90-02-05 Bently Nevada 3300 XL 11 mm Proximity Probe

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330709-000-040-90-02-05
• Series: 3300 XL 11 mm Proximity Probes
• Probe Type: 3300 XL 11 mm Probe, M16 x 1.5 thread, without armor
• Unthreaded Length: 0 mm
• Overall Case Length: 40 mm
• Total Length: 9.0 meters (29.5 feet)
• Connector and Cable Type: Miniature coaxial ClickLoc connector, standard cable
• Agency Approval: Multiple Approvals
• Probe DC Resistance: 8.5 ± 1.1 ohms from center conductor to outer conductor
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 304 stainless steel (SST)
• Probe Cable: 75 Ω triaxial, fluoroethylene propylene (FEP) insulated
• Probe Case Thread: M16 x 1.5
• Maximum Thread Engagement: 24 mm
• Probe Case Torque: Recommended 21.1 N•m (187 in•lb); Maximum rated 63.3 N•m (560 in•lb)
• Connector-to-Connector Torque: Finger tight recommended; maximum 0.565 N•m (5 in•lb)
• Minimum Bend Radius: 25.4 mm (1.0 in) with or without SST armor
• Probe Temperature Range: -52°C to +177°C (-62°F to +351°F) for operating and storage
• Temperature Note: Exposing the probe below -34°C (30°F) may cause premature pressure seal failure

Measuring Performance and Environmental Durability

• This probe targets flat surfaces with a recommended minimum target diameter of 30.5 mm (1.2 in).
• For shaft diameter measurement, Bently Nevada recommends a minimum shaft diameter of 152 mm (6.0 in).
• The 75 Ω triaxial FEP cable design helps resist cross-talk and supports clean signal transmission in industrial environments.
• The AISI 304 stainless steel case resists corrosion and mechanical wear in demanding plant conditions.
• The PPS probe tip provides stable electrical insulation and thermal resistance across the rated temperature range.
• The probe operates and stores from -52°C to +177°C, which covers many severe industrial applications.
• The 3300 XL 11 mm series supports reliable proximity measurement for vibration and position monitoring systems.
• The Multiple Approvals option makes this model suitable for installations that require certified compliance.

Temperature Classification for EPL Ga and Gc

• T1: Ambient temperature -55°C to +232°C
• T2: Ambient temperature -55°C to +177°C
• T3: Ambient temperature -55°C to +120°C
• T4: Ambient temperature -55°C to +80°C
• T5: Ambient temperature -55°C to +40°C

Temperature Classification for EPL Dc

• T280°C @ Ta: Ambient temperature -55°C to +232°C
• T225°C @ Ta: Ambient temperature -55°C to +177°C
• T170°C @ Ta: Ambient temperature -55°C to +120°C
• T130°C @ Ta: Ambient temperature -55°C to +80°C
• T105°C @ Ta: Ambient temperature -55°C to +100°C
• T90°C @ Ta: Ambient temperature -55°C to +40°C

Installation Guide

• Verify the M16 x 1.5 thread matches your mounting hole before you start installation.
• Keep the maximum thread engagement within 24 mm to avoid case damage or incorrect seating.
• Tighten the probe case to the recommended 21.1 N•m (187 in•lb) torque value.
• Do not exceed the maximum rated case torque of 63.3 N•m (560 in•lb).
• Hand-tighten the ClickLoc connector, then apply no more than 0.565 N•m (5 in•lb).
• Respect the 25.4 mm (1.0 in) minimum bend radius for the probe cable.
• Route the cable away from sharp edges and high-vibration contact points.
• Confirm the target size meets the minimum flat surface or shaft diameter recommendations.
• Check probe DC resistance near 8.5 ± 1.1 ohms before you connect the system.
• Avoid temperatures below -34°C (30°F) to protect the pressure seal from premature failure.

Package Contents

• 1 x Bently Nevada 330709-000-040-90-02-05 3300 XL 11 mm Proximity Probe
• 1 x Miniature coaxial ClickLoc connector with standard cable
• 1 x Protective packaging for safe transport
• Shipping via FedEx, UPS, or DHL based on your location and preference

FAQ

• Is this probe new and original? Yes, we supply a brand new original Bently Nevada probe.
• Do you have stock for this model? Yes, we keep this model in stock for immediate order processing.
• How fast do you ship? We ship within 5 days after we confirm your order.
• Which shipping methods do you use? We commonly use DHL, FedEx, and UPS.
• Can I return the product? Yes, we support returns within 30 days.
• What does Multiple Approvals mean for this probe? It means the probe carries several agency approvals for certified installations.
• What is the total length of this probe? The total length is 9.0 meters (29.5 feet).
• What connector does this probe use? It uses a Miniature coaxial ClickLoc connector with standard cable.
• What is the probe DC resistance? The resistance is 8.5 ± 1.1 ohms from center conductor to outer conductor.
• What is the operating temperature range? The range is -52°C to +177°C (-62°F to +351°F).
• What is the recommended case torque? The recommended torque is 21.1 N•m (187 in•lb).
• What is the minimum bend radius? The minimum bend radius is 25.4 mm (1.0 in).
• Does this probe include armor? No, this model comes without armor.

Contact Information

• Inquiries: sales@nex-auto.com
• WhatsApp: +86 153 9242 9628
• Partner NexAuto Technology Limited: https://www.nex-auto.com/