330905-05-10-10-12-05 Proximity Probe New Stock Bently Nevada

Bently Nevada 330905-05-10-10-12-05: 3300 NSv Proximity Probe Details

• Manufacturer & Series: Bently Nevada, 3300 NSv Proximity Probes.
• Part Number: 330905-05-10-10-12-05 – M10x1 thread, no armor, 50mm unthreaded length.
• Case & Total Length: 100mm overall case length; total probe length 1.0 meter (39 inches).
• Connector & Cable Type: Miniature coaxial ClickLoc connector with FluidLoc cable.
• Agency Approval: Option -05 with multiple international approvals.

Linear Range and Key Electrical Specifications

• Linear Range: 1.5 mm (60 mils) starts at 0.25 mm from target and ends at 1.75 mm.
• Output voltage: Approximately -1 to -13 Vdc across the linear range.
• Recommended Gap Setting: 1.0 mm (40 mils) from the target surface.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) with +12.5%/-20% tolerance including interchangeability.
• Deviation from Best Fit Straight Line (DSL): Less than ±0.06 mm (±2.3 mils).
• Probe DC Resistance (1.0m length): 4.2 ± 0.5 ohms from center conductor to outer conductor.

Frequency Response, Target and Field Wiring

• Frequency Response: 0 to 10 kHz typical, +0, -3 dB with up to 305 meters of field wiring.
• Minimum target diameter (flat): 8.9 mm (0.35 in); recommended minimum is 13 mm (0.5 in).
• Small shaft caution: For shafts below 13 mm, scale factor may shift; reducing gap helps limit changes.
• Field wiring spec: Use 0.2 to 1.5 mm² (16-24 AWG) or 0.25-0.75 mm² with ferrules.
• Recommended cable type: Three-conductor shielded triad, maximum length 305 meters to the Proximitor Sensor.

Environmental & Mechanical Robustness

• Operating Temperature: -52°C to +177°C (-62°F to +351°F).
• Storage Temperature: -52°C to +177°C (-62°F to +351°F).
• Probe Tip Material: Polyphenylene sulfide (PPS) for high durability.
• Probe Case Material: AISI 304 stainless steel (SST).
• Probe cable: 75 ohm coaxial with FEP insulation; available lengths: 0.5, 1, 5, or 7 meters.
• Minimum Bend Radius: 25.4 mm (1.0 inch) with or without stainless steel armor.
• Maximum torque on M10x1 threads: Finger tight only, do not exceed 0.56 N•m (5 in•lb).
• Case thread torque (first three threads): Max 22.6 N•m (200 in•lb), recommended 7.5 N•m (66 in•lb).
• Pressure seal: Viton O-ring seals differential pressure; not pressure tested before shipment.

Extension Cable Electrical Data and Installation Notes

• Extension cable DC resistance: Center conductor 0.220 Ω/m (0.067 Ω/ft); shield 0.066 Ω/m (0.020 Ω/ft).
• Extension cable capacitance: 69.9 pF/m (21.3 pF/ft) typical value.
• Maximum thread engagement: M10x1 case allows up to 15 mm engagement length.
• Compatibility: Fully interchangeable with Bently Nevada’s previous 3300 RAM probes and cables.
• Chemical resistance: The 3300 NSv Proximity Probes provide increased resistance for process compressors.
• FluidLoc cable advantage: Option 12 offers enhanced protection in wet or oil-rich environments.

Frequently Asked Questions (FAQ)

• Q: Is this 330905-05-10-10-12-05 probe brand new and original?
  A: Yes. We supply only new original 3300 NSv Proximity Probes in factory packaging with full traceability.
• Q: Do you have this model in stock?
  A: Yes, we keep 330905-05-10-10-12-05 in stock for immediate order processing.
• Q: How fast will you ship my order?
  A: We ship within 5 days via FedEx, UPS, or DHL. Transit time depends on your region.
• Q: What is the linear measurement range of the 3300 NSv probe?
  A: The probe delivers a 1.5 mm (60 mils) linear range from 0.25 mm to 1.75 mm from the target.
• Q: Can I use this probe with older Bently Nevada monitors?
  A: Yes. The 3300 NSv is mechanically and electrically compatible with 3300 RAM proximity systems.
• Q: What is the recommended gap for best performance?
  A: Bently Nevada recommends a 1.0 mm (40 mils) gap for optimal linear output.
• Q: What temperature range does this probe support?
  A: Operating range spans -52°C to +177°C (-62°F to +351°F) for extreme environments.
• Q: What is the FluidLoc cable option?
  A: Option 12 includes a FluidLoc cable – it provides extra sealing against moisture and process fluids.
• Q: How long can my field wiring be?
  A: You can use up to 305 meters (1000 feet) of shielded triad cable with minimal signal rolloff.
• Q: Can I return the probe if it does not suit my application?
  A: Yes, we support 30-day returns for unused items in original condition.
• Q: Does the probe come pressure tested?
  A: Standard probes are not pressure tested before shipment. Contact our custom department if you require a pressure seal test.

Contact Information Inquiries: Email sales@nex-auto.com or call +86 153 9242 9628 (WhatsApp). Our team supports your 3300 NSv Proximity Probes orders with fast response.

Partner NexAuto Technology Limited : https://www.nex-auto.com/