330450-60 Bently Nevada Accelerometer | 100 mV/g Sensor

330450-60 Bently Nevada Accelerometer – 100 mV/g, 80 g, 6 Metre Cable, High-Temperature Sensor

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330450-60
• Category: Accelerometer / Vibration Sensor
• Sensitivity: 10.2 mV/m/s² (100 mV/g) with ±5% tolerance
• Acceleration Range: 785 m/s² (80 g) peak overall within 15 to 10,000 Hz
• Amplitude Linearity: ±2% up to 785 m/s² (80 g) peak
• Broadband Noise Floor: 0.059 m/s² (0.006 g) rms from 10 Hz to 15 kHz
• Frequency Response: 15 to 10,000 Hz (900 to 600,000 cpm) ±3dB; 40 to 4,000 Hz (2,400 to 240,000 cpm) ±5%
• Transverse Sensitivity: Less than 5% of axial
• Mounted Resonant Frequency: Greater than 15 kHz
• Maximum Cable Length: 305 metres (1,000 ft) with no signal degradation
• Cable Length: 6 metres (ordering option 60)

Electrical Characteristics

• Input Voltage: -24 ± 0.5 Vdc
• Bias Current: 2 mA nominal
• Output Bias Voltage: -12 ± 0.5 Vdc
• Grounding: Case isolated

Environmental Limits and Durability

• Sensing Head Temperature Range: -55°C to +400°C (-67°F to +752°F)
• Integral Hardline Cable Temperature Range: -55°C to +400°C (-67°F to +752°F)
• Electronics Temperature Range: -55°C to +100°C (-67°F to +212°F)
• Shock Survivability: 24,535 m/s² (2,500 g) peak
• Relative Humidity: Up to 100% non-submerged; case is hermetically sealed

Physical Description

• Weight: 953 grams (2.10 lb) typical
• Case Material: 300 series stainless steel
• Connector: 3-pin Mil-C-5015 receptacle, hermetically sealed, 304 stainless steel shell
• Polarity: Pin A goes positive with respect to Pin C when force applies from base to top of sensing head
• Minimum Bend Radius: 51 mm (2.0 in)

Hazardous Area Approvals

• Ex ia IIC T4: AEx ia IIC T4; Class I, Div 1, Groups A, B, C, D; Class II, Div 1, Groups E, F, G; Class III, Div 1
• Installation: Per drawing 168078
• Temperature Code: T4 @ Ta (-40°C to 100°C)
• Enclosure: Type 4X
• Ex nL IIC T4: Ex ec IIC T4; Class I, Zone 2; Class II, Div 2, Groups A, B, C and D
• Installation: Per drawing 168078
• Temperature Code: T4 @ Ta (-40°C to 100°C)
• Enclosure: Type 4X

Installation Guidelines

• Mount the sensor on a flat, clean surface to ensure proper coupling.
• Apply the specified torque to the mounting stud for stable measurement.
• Keep the minimum bend radius of 51 mm (2.0 in) for the 6 metre hardline cable.
• Connect the 3-pin Mil-C-5015 receptacle to a compatible extension cable.
• Verify the input voltage stays at -24 ± 0.5 Vdc before powering the system.
• Follow drawing 168078 for hazardous area installations.
• Confirm the case isolation to avoid ground loops in the measurement circuit.

Package Contents

• 1 x Bently Nevada 330450-60 Accelerometer with 6 metre cable
• 1 x Mounting Stud
• 1 x Product Documentation

Shipping and Support

• We ship worldwide via FedEx, UPS, and DHL.
• We dispatch all orders within 5 days after payment confirmation.
• We accept returns within 30 days of delivery.
• We guarantee every unit as brand new and original.

FAQ

• Q: What is the sensitivity of the 330450-60?
  A: The sensor provides 10.2 mV/m/s² (100 mV/g) with a tolerance of ±5%.
• Q: How long is the cable on this accelerometer?
  A: The 330450-60 comes with a 6 metre (ordering option 60) integral hardline cable.
• Q: What frequency range does this sensor cover?
  A: It covers 15 to 10,000 Hz with ±3dB and 40 to 4,000 Hz with ±5%.
• Q: What is the maximum operating temperature?
  A: The sensing head and hardline cable handle up to +400°C (+752°F).
• Q: Can I extend the cable beyond 6 metres?
  A: Yes, you can run up to 305 metres (1,000 ft) without signal degradation.
• Q: What is the shock survivability rating?
  A: The sensor survives shocks up to 24,535 m/s² (2,500 g) peak.
• Q: Is the 330450-60 suitable for hazardous areas?
  A: Yes, it carries Ex ia IIC T4 and Ex nL IIC T4 approvals for classified locations.
• Q: What is the typical weight of this sensor?
  A: The sensor weighs approximately 953 grams (2.10 lb).
• Q: Do you have this item in stock?
  A: Yes, we keep this item in stock and ship within 5 days.

Contact Information

Inquiries: sales@nex-auto.com
Phone/WhatsApp: +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/