330104-02-14-50-12-RU Bently Nevada Proximity Probe Metric 5m

3300 XL 8 mm Proximity Probe – Metric Model 330104-02-14-50-12-RU

Key Technical Specifications

• Manufacturer & Model: Bently Nevada 330104-02-14-50-12-RU (3300 XL series).
• Probe Type: 3300 XL 8 mm Proximity Probe, Metric with armor.
• Thread & Case: M10 x 1 thread, AISI 303/304 SST case, PPS tip.
• Unthreaded & Overall Length: 20 mm unthreaded; 140 mm overall case length.
• Total Cable Length: 5.0 meters (16.4 feet) with FluidLoc cable & Miniature coaxial ClickLoc connector.
• Agency Approval: Country Specific (Option RU).
• Linear Range: 2 mm (80 mils) from 0.25 to 2.3 mm (10 to 90 mils).
• DC Resistance (RPROBE): 8.73 ± 0.50 Ω (5.0 m length).
• Field Wiring: 0.2 to 1.5 mm² (16-24 AWG), 3-conductor shielded triad recommended.
• Max Cable Length: 305 meters (1,000 feet) between sensor and monitor.
• Temperature Range (Standard): -52°C to +177°C (-62°F to +350°F).
• Humidity Tolerance: Less than 3% ASF change at 93% RH (IEC 68-2-3, 56 days).
• Intrinsic Safety: Class I, Zone 0; AEx/Ex ia IIC T5…T1 Ga (with zener barriers).
• Non-incendive: Class I, Zone 2; AEx/Ex nA IIC T5…T1 Gc (per drawing 140979).

Installation & Mechanical Details

• Probe Case Thread: M10x1 with a maximum thread engagement of 15 mm.
• Probe Weight: 323 g/m (11.4 oz).
• Pressure Seal: Viton® O-ring seals differential pressure; not pressure tested before shipment.
• Gap Setting (Radial Vibration): -9 Vdc (approx. 1.27 mm / 50 mils).
• 5-Meter Cable Note: This 5.0 m probe works exclusively with the 5 meter Proximitor sensor.
• Field Wiring Caution: Use tinned wire and keep total length under 305 m to avoid high-frequency rolloff.
• Storage Temperature: Same as operating range; avoid prolonged exposure below -34°C.

Environmental & Safety Certifications

• Hazardous Areas (ia): Class I, Zone 0; AEx/Ex ia IIC T5…T1 Ga; also Class I, II, III, Groups A-G.
• Hazardous Areas (nA/ec): Class I, Zone 2; AEx/Ex nA IIC T5…T1 Gc; Class I, Div 2, Groups A-D.
• Probe Tip Material: Polyphenylene sulfide (PPS) for chemical resistance.
• Case Material: AISI 303 or 304 stainless steel (SST) for durability.
• Humidity Performance: Maintains scale factor stability in 93% RH environments for up to 56 days.

Frequently Asked Questions (FAQ)

• Q: Is the 330104-02-14-50-12-RU brand new and original?
  A: Yes, we supply only brand new, genuine Bently Nevada products.
• Q: How long does delivery take?
  A: We ship within 5 days via DHL, FedEx, or UPS; transit times vary by destination.
• Q: What is the recommended gap setting for radial vibration?
  A: Set the gap to -9 Vdc, which corresponds to approximately 1.27 mm (50 mils).
• Q: Can I use this probe with longer field wiring?
  A: Yes, up to 305 meters, but check frequency response graphs for signal rolloff at high frequencies.
• Q: Does the probe support intrinsically safe installations?
  A: Yes, with zener barriers per drawing 141092 (ia) or galvanic isolators.
• Q: What is the maximum temperature for the probe tip?
  A: Standard tip handles -52°C to +177°C; extended range tips go up to +218°C.
• Q: Are returns accepted?
  A: Yes, we accept returns within 30 days from the delivery date.

Contact Information Inquiries: sales@nex-auto.com ， +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/