330103-00-12-10-12-00 Bently Nevada 3300 XL Probe

330103-00-12-10-12-00 Bently Nevada 3300 XL 8 mm Proximity Probes

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330103-00-12-10-12-00
• Product Type: 3300 XL 8 mm Proximity Probes
• Thread Type: M10 x 1, without armor
• Unthreaded Length: 0 mm
• Overall Case Length: 120 mm
• Total Length: 1.0 meter (3.3 feet)
• Connector and Cable: Miniature coaxial ClickLoc connector with FluidLoc cable
• Agency Approval: Not required
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 303 or 304 stainless steel (SST)
• Nominal Probe DC Resistance: 7.59 ± 0.50 Ω at 1.0 m
• Linear Range: 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils)
• Recommended Gap Setting: -9 Vdc, about 1.27 mm (50 mils)
• Probe Weight: 323 g/m (11.4 oz)
• Standard Temperature Range: -52°C to +177°C (-62°F to +350°F)
• Extended Temperature Range: -52°C to +218°C (-62°F to +425°F) for probe tip
• Extended Cable and Connector Range: -51°C to +260°C (-60°F to +500°F)
• Relative Humidity: Less than 3% change in Average Scale Factor at 93% humidity for up to 56 days
• Field Wiring: 0.2 to 1.5 mm² (16 to 24 AWG), 3 conductor shielded triad cable
• Maximum Field Wiring Length: 305 meters (1,000 feet)

FAQ

• Q: What is the linear range of this probe?
  A: The linear range is 2 mm (80 mils), starting at about 0.25 mm from the target.
• Q: What gap setting do you recommend for radial vibration?
  A: Set the gap to -9 Vdc, which is approximately 1.27 mm (50 mils).
• Q: What is the probe DC resistance?
  A: The nominal resistance is 7.59 ± 0.50 Ω at 1.0 meter.
• Q: What is the maximum field wiring length?
  A: You can use up to 305 meters (1,000 feet) between the Proximitor Sensor and monitor.
• Q: What is the standard operating temperature range?
  A: The standard probe works from -52°C to +177°C (-62°F to +350°F).
• Q: Does this probe come with agency approval?
  A: This model has the 00 option, which means agency approval is not required.
• Q: What cable and connector type does it use?
  A: It uses a miniature coaxial ClickLoc connector with FluidLoc cable.
• Q: How much does the probe weigh?
  A: The probe weighs 323 g/m (11.4 oz).

Contact Information

• Inquiries: sales@nex-auto.com
• WhatsApp: +86 153 9242 9628
• Partner NexAuto Technology Limited: https://www.nex-auto.com/