DT50-P1114 SICK Dx50 PNP Laser Sensor

SICK DT50-P1114 Dx50 Heated Laser Distance Sensor for Deep-Freeze Use

Technical Specifications

• Brand: SICK
• Model: DT50-P1114
• Series / Family: Dx50 DT50 Heated
• Part Number: 1047581
• Measurement Principle: HDDM™ optical time-of-flight with visible red laser at 658 nm
• Measurement Range: 200 mm to 10,000 mm at 90% remission; 200 mm to 6,500 mm at 18%; 200 mm to 4,000 mm at 6%
• Repeatability: ≥ 2.5 mm
• Measurement Accuracy: Typically ± 10 mm
• Response Time: 20 ms in fast mode or 30 ms in slow mode with averaging
• Laser Class: Class 2 per IEC 60825-1:2014 and EN 60825-1:2014; average power < 1 mW, pulse peak 180 mW, pulse duration 5 ns
• Digital Output: 1x PNP, ≤ 100 mA
• Analog Output: 1x voltage output 0 V to 10 V, ≥ 5 kΩ, 16-bit
• Input: Multifunctional input (MF)
• Supply Voltage: DC 24 V nominal (18 V to 30 V); above 15 V required for the internal heater; reverse-polarity protected
• Power Consumption: ≤ 28 W with heater active, without external load
• Electrical Connection: M12 male connector, 8-pin
• Operating Temperature: -40 °C to +65 °C with integrated heating; up to +80 °C with 2 cooling plates; up to +140 °C with 2 cooling plates and protection filter
• Storage Temperature: -40 °C to +75 °C
• Enclosure Rating: IP65 per EN 60529
• Dimensions (W x H x D): 36.1 mm x 62.7 mm x 57.7 mm
• Housing Material: Zinc die-cast (ZNAL4CU1) with acrylic glass (PMMA) optical window
• Weight: Approx. 200 g

Key Features and Functional Highlights

• The factory-integrated internal heater keeps the sensor running down to -40 °C.
• Direct diffuse measurement reaches 10 m on natural objects without any reflector.
• The rugged zinc die-cast housing (ZNAL4CU1) meets heavy-duty industrial automation demands.
• An LC display and menu buttons make setup and live readout straightforward.
• HDDM™ optical time-of-flight technology ensures high repeatability and ambient light stability.
• The PNP digital output and 0 V to 10 V analog output fit most control systems.
• The sensor handles cold-storage, deep-freeze, and standard plant environments alike.

Installation Guide

• Mount the sensor firmly and aim the optical window at the target surface.
• Keep the laser beam square to the target for the best accuracy.
• Wire the 8-pin M12 connector to a DC 24 V supply above 15 V.
• Confirm the supply delivers enough current for the 28 W heater.
• Connect the PNP digital output or the 0 V to 10 V analog output to the controller.
• Use the MF input to trigger measurements or switch operating modes.
• Add cooling plates above +65 °C and a protection filter for extreme heat.
• Tighten the connector fully to preserve the IP65 seal.

Package List

• 1x SICK DT50-P1114 heated distance sensor
• 1x M12 8-pin connector or connection cable (as configured)
• 1x Printed quick start guide
• 1x Original manufacturer packaging

Shipping and Support

• We ship worldwide through FedEx, UPS, and DHL.
• We dispatch in-stock items within 5 days.
• We accept returns within 30 days.
• Every unit is brand new and original.

FAQ

• Q: How cold can the DT50-P1114 operate?
  A: The integrated heater supports operation down to -40 °C in cold-storage and deep-freeze rooms.
• Q: What supply voltage does the heater need?
  A: The sensor runs on DC 24 V nominal, and the heater requires more than 15 V.
• Q: How much power does the heated model draw?
  A: It draws up to 28 W with the heater active and no external load.
• Q: What outputs does the DT50-P1114 provide?
  A: It offers one PNP digital output and one 0 V to 10 V analog output.
• Q: How far can the sensor measure?
  A: It reaches 10,000 mm on 90% remission targets and 4,000 mm on 6% dark targets.
• Q: Does it need a reflector?
  A: No. It measures natural objects directly through diffuse reflection.
• Q: What connector does the sensor use?
  A: It uses an 8-pin M12 male connector.
• Q: Can the sensor work in hot areas too?
  A: Yes. Two cooling plates extend it to +80 °C, and a protection filter raises it to +140 °C.

Contact Information

Inquiries: sales@nex-auto.com or +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/