21128-01-03 Bently Nevada - Velocity Transducer Housing

21128-01-03 Velocity Transducer Housing by Bently Nevada

Key Technical Specifications

• Brand: Bently Nevada
• Model: 21128-01-03
• Category: Velocity Transducer Housing
• Housing Material: 303 stainless steel for strong corrosion resistance
• Environmental Rating: Meets NEMA 4X and IP65 when installed correctly
• Temperature Range: -29°C to +121°C (-20°F to +250°F)
• Moisture Resistance: Resists moisture and corrosion, but is not submersible
• O-ring Material: Neoprene for a secure environmental seal
• Weight: 1.6 kg (3.55 lb) without sensor or fittings
• Outlet Port Size: 1/2-in NPT
• Internal Mounting Thread: 1/2-in 20 UNF for 21128 and CA21128
• Internal Mounting Thread: 5/8-in 18 UNF-2B for BA42608

Mounting and Cap Options

• Mounting Thread and Cap Option: 01 means unthreaded base with 28.5 mm (1.125 in) diameter
• Cable Exit Fitting Option: 03 means 1/2-in NPT explosion-proof and cable grip fittings
• Tall Cap Option: Required for a Velomitor CT installed inside a housing
• Tall Cap Option: Also required for a 9200 or 74712 Seismoprobe with isolated base in a 21128 housing
• Cable Part Number: 89477-AA connects a Velomitor Sensor to a monitor when using the 21128 Housing

Installation Guide

• Verify the housing model and thread option before you begin installation.
• Install the compatible velocity sensor into the internal mounting thread.
• Use cable part number 89477-AA to connect a Velomitor Sensor to a monitor.
• Confirm the cable exit fitting matches your 1/2-in NPT system.
• Choose the tall cap option when you install a Velomitor CT or specific Seismoprobe models.
• Check the O-ring and sealing surfaces to maintain IP65 protection.
• Do not submerge the housing because it resists moisture but is not submersible.
• Follow local electrical and safety codes for hazardous or non-hazardous areas.

Package List

• 1 x Bently Nevada 21128-01-03 Velocity Transducer Housing
• 1 x Neoprene O-ring
• 1 x 1/2-in NPT explosion-proof and cable grip fitting
• 1 x Unthreaded base with 28.5 mm (1.125 in) diameter
• Mounting hardware as supplied by the manufacturer

Shipping and Support

• We keep this item in stock and ship it within 5 days.
• We use common express carriers such as FedEx, UPS, and DHL.
• We accept returns within 30 days.
• This product is brand new and original.

FAQ

• Q: What is the temperature range of the 21128-01-03 housing?
  A: The housing operates from -29°C to +121°C (-20°F to +250°F).
• Q: Does this housing meet NEMA 4X and IP65 requirements?
  A: Yes, it meets NEMA 4X and IP65 when you install it properly.
• Q: Can I use this housing underwater?
  A: No, it resists moisture and corrosion but is not submersible.
• Q: What cable do I need for a Velomitor Sensor in this housing?
  A: Use cable part number 89477-AA to connect the sensor to a monitor.
• Q: When do I need the tall cap option?
  A: You need it for a Velomitor CT or for a 9200 or 74712 Seismoprobe with isolated base in a 21128 housing.
• Q: What is the outlet port size?
  A: The outlet port size is 1/2-in NPT.
• Q: What is the weight of the housing?
  A: The housing weighs 1.6 kg (3.55 lb) without a velocity sensor or fittings.

Contact Information

Inquiries: sales@nex-auto.com or +86 153 9242 9628.

Partner NexAuto Technology Limited: https://www.nex-auto.com/