TC-FCCR01 Honeywell ControlNet Gateway Redundant

TC-FCCR01 Honeywell ControlNet Gateway, Redundant Media

Key Technical Specifications

• Brand: Honeywell
• Model: TC-FCCR01
• Category: ControlNet Gateway
• I/O Capacity: 8 modules
• Communication Rate: 5M bit/s
• Supports Redundant ControlNet Cabling: Yes
• Connector Screw Torque: 7-9 inch-pounds
• Input Voltage Rating: 24V dc nominal
• Input Voltage Range: 19.2V to 31.2V dc, includes 5% ac ripple
• Flexbus Output Current: 640mA maximum at 5V dc
• Isolation Voltage: 500V ac between user power and flexbus

Power and Thermal Ratings

• Power Supply Requirement: Use a Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV) supply to comply with CE Low Voltage Directives
• Power Consumption: 400mA maximum from external 24V supply
• Power Dissipation: 4.6W maximum at 19.2V dc
• Thermal Dissipation: 15.7 BTU/hr at 19.2V dc

Indicators and Programming Ports

• Comm A Indicator: Red and green for channel A
• Comm B Indicator: Red and green for channel B
• I/O Status Indicator: Red and green
• Programming Ports: 1 RJ-45 Network Access Port (NAP) for use with ControlNet programming cable, such as 1786-CP cable
• Programming Port Note: This port is not supported

General Specifications

• Dimensions HxWxD: 87mm x 94mm x 69mm (3.4in x 3.7in x 2.7in)
• Operational Temperature: 0 to 55℃ (32 to 131℉)
• Storage Temperature: -40 to 85℃ (-40 to 185℉)
• Relative Humidity: 5 to 95% non-condensing
• Shock, Operating: 30g peak acceleration, 11(±1)ms pulse width
• Shock, Non-operating: 50g peak acceleration, 11(±1)ms pulse width
• Vibration: Tested 5g at 10-500Hz per IEC 68-2-6
• ControlNet Cable: Belden RG-6/U Quad Shield
• Power Conductors Type: Copper, stranded or solid
• Wire Size: 12 gauge (4mm2) stranded maximum, 3/64 (1.2mm) inch insulation maximum

Installation Guide

• Mount the TC-FCCR01 in a panel that allows access to all connectors
• Use a SELV or PELV power supply to meet CE Low Voltage Directives
• Confirm the input voltage stays between 19.2V and 31.2V dc
• Tighten connector screws to 7-9 inch-pounds for reliable contact
• Use Belden RG-6/U Quad Shield cable for ControlNet wiring
• Connect both channel A and channel B for redundant media operation
• Keep the flexbus output current at or below 640mA at 5V dc
• Check the Comm A, Comm B, and I/O status indicators after power-up
• Use the RJ-45 NAP port only for supported programming tasks
• Maintain 5 to 95% non-condensing humidity around the module

Package List

• 1 x Honeywell TC-FCCR01 ControlNet Gateway
• 1 x Installation guide
• 1 x Protective packing box
• Shipping Methods: FedEx, UPS, and DHL

FAQ

• Q: What is the TC-FCCR01?
• A: It is a ControlNet gateway with redundant media support from Honeywell.
• Q: How many I/O modules does it support?
• A: It supports up to 8 modules.
• Q: What is the communication rate?
• A: The communication rate is 5M bit/s.
• Q: Does it support redundant ControlNet cabling?
• A: Yes, it supports redundant ControlNet cabling.
• Q: What is the input voltage rating?
• A: The input voltage rating is 24V dc nominal.
• Q: What is the input voltage range?
• A: The range is 19.2V to 31.2V dc, including 5% ac ripple.
• Q: What power supply should I use?
• A: Use a SELV or PELV supply to comply with CE Low Voltage Directives.
• Q: What is the power consumption?
• A: It draws 400mA maximum from an external 24V supply.
• Q: What is the power dissipation?
• A: Power dissipation is 4.6W maximum at 19.2V dc.
• Q: What is the thermal dissipation?
• A: Thermal dissipation is 15.7 BTU/hr at 19.2V dc.
• Q: What indicators does it have?
• A: It has Comm A, Comm B, and I/O status indicators, all red and green.
• Q: What programming port does it use?
• A: It has 1 RJ-45 Network Access Port for ControlNet programming cable, but it is not supported.
• Q: What are the dimensions?
• A: The dimensions are 87mm x 94mm x 69mm.
• Q: What is the operating temperature range?
• A: The operating temperature range is 0 to 55℃.
• Q: What is the storage temperature range?
• A: The storage temperature range is -40 to 85℃.
• Q: What is the relative humidity range?
• A: The range is 5 to 95% non-condensing.
• Q: What cable does ControlNet use?
• A: ControlNet uses Belden RG-6/U Quad Shield cable.
• Q: What is the isolation voltage?
• A: Isolation is 500V ac between user power and flexbus.
• Q: What connector screw torque should I use?
• A: Tighten connector screws to 7-9 inch-pounds.
• Q: Is the product new and original?
• A: Yes, the product is brand new and original.
• Q: Do you have stock?
• A: Yes, we have stock available.
• Q: How fast do you ship?
• A: We ship within 5 days.
• Q: What shipping methods do you use?
• A: We commonly use DHL, FedEx, and UPS.
• Q: What is the return policy?
• A: We support returns within 30 days.

Contact Information

For inquiries, please contact us at sales@nex-auto.com or +86 153 9242 9628.

Partner NexAuto Technology Limited: https://www.nex-auto.com/