IC694TBB132 36-Pin Terminal Block GE Fanuc

GE Fanuc IC694TBB132 Extended Box Style Terminal Block Overview

• The IC694TBB132 terminal block accommodates #14 to 26 AWG solid or stranded copper wire, ensuring versatility for various field device connections.
• Each of the 36 screw terminals requires a specific tightening torque of 7 lb-in to guarantee a reliable and secure electrical connection.
• You must strip wires to a precise length of 0.310 inches (7.87 mm); a reference mark on the bottom of the block assists with accurate preparation.
• This component measures 6 x 6 inches and features an outer cover that is 0.5 inches deeper than the inside to accommodate wires with thicker insulation.
• While the terminal block supports hot swapping, we recommend removing power from the module when replacing the electronics to prevent any potential damage.

Technical Specifications and Mounting Details

• Brand and Manufacturer: This unit is a GE Fanuc part from the PACSystem RX3i series, ensuring genuine compatibility and reliable performance.
• Model and Type: The IC694TBB132 functions as an extended box-style interface for RX3i 32-input high-density I/O modules.
• Electrical and Mechanical Data: It features 36 pins with a 7 lb-in tightening torque and supports 14-26 AWG wire for solid or stranded conductors.
• Physical Dimensions: The terminal block measures 6 x 6 inches with a standard-depth output cover of 23 mm or 0.9 inches.
• Installation Guide: Align the top of the block with the cover bottom, match the notches and grooves, and slide upward until you hear a clicking sound.

Frequently Asked Questions (FAQ)

• Q: What is the correct wire size for the IC694TBB132 terminal block?
  A: This terminal block accepts wire sizes ranging from #14 AWG to #26 AWG. You can use either solid or stranded copper wire types with this model.
• Q: How much torque should I apply to the screws on this terminal block?
  A: You must tighten each screw terminal to exactly 7 lb-in. This specific torque value ensures a proper connection without damaging the conductor or the block.
• Q: What modules are compatible with the IC694TBB132?
  A: This terminal block works with PACSystem RX3i high-density I/O modules and individually isolated, 16-channel Series 90-30 equivalent modules.
• Q: What is the required wire strip length for termination?
  A: You need to strip the insulation from each wire to a length of 0.310 inches (7.87 mm). A guide on the bottom of the IC694TBB132 helps you measure this accurately.
• Q: How do I know when the IC694TBB132 is properly installed?
  A: You will hear a clicking sound when the block correctly snaps into place. If you feel resistance, realign the notches and grooves before trying again.

Contact Information
Inquiries: sales@nex-auto.com
WhatsApp: +86 153 9242 9628

Partner
NexAuto Technology Limited: https://www.nex-auto.com/