Skip to product information
1 of 3

GL-VM23FP Keyence GL-V Series Light Curtain

In stock (14 units), ready to be shipped
  • Vendor:

    Keyence

  • Type:

    Safety Light Curtain

  • Country of Origin:

    USA

  • Dimensions:

    14*16*5cm

  • Weight:

    500 g

  • Tags: Safety light curtain

GL-VM23FP Keyence Safety Light Curtain – Compact Type 4 Finger Protection with PNP Output

Technical Specifications

  • Brand: Keyence
  • Model: GL-VM23FP
  • Series: GL-V series
  • Category: Type 4 safety light curtain (ESPE / AOPD), finger protection type
  • Detection capacity: minimum detectable object size ø14 mm
  • Beam axes: 23 axes with 10 mm spacing
  • Detection height: 220 mm; total length 240 mm
  • Detecting distance: 0.3 to 12 m
  • Response time: max. 4.8 ms (OSSD, channel 0, ON to OFF)
  • Light source: infrared LED at 850 nm, Exempt Group (IEC62471)
  • Effective angular aperture: up to ±2.5° at 3 m or above
  • Output type: transistor output x2 (PNP)
  • Supply voltage: 24 VDC -20/+25%, ripple 10% or less, Class 2
  • Current consumption: transmitter max. 66 mA; receiver max. 76 mA
  • Maximum load current: 150 mA or less
  • Residual voltage (ON): up to 2.5 V; OFF voltage up to 2.0 V (5 m cable)
  • Leakage current: up to 0.8 mA; load capacity 0.8 µF; load wiring resistance up to 2.5 Ω
  • Safety standards: IEC61496-1/-2 Type 4, EN ISO13849-1 Category 4 PL e, IEC61508 SIL3, UL1998
  • EMC: EN55011 Class A, FCC Part15B Class A, ICES-003 Class A

Environmental Durability and Interference Resistance

  • Operating temperature ranges from -30 to +55 °C without freezing.
  • Storage temperature ranges from -30 to +70 °C without freezing.
  • Relative humidity reaches up to 95 % RH with no condensation.
  • Ambient light tolerance covers incandescent lamp 3,000 lux or less.
  • Sunlight tolerance reaches 20,000 lux or less for bright production halls.
  • Protection rating meets IP65/IP67 under IEC60529 for dusty and wet areas.
  • Vibration resistance handles 5 to 150 Hz at 1G, 10 cycles per axis.
  • Shock resistance handles 15 G pulses of 6 ms, 100 times per axis.
  • Interference prevention supports up to 2 units through series connection and switch setting.
  • Protection circuits cover supply reverse-connection, per-output short-circuit and surge events.

Physical Build and Materials

  • The main unit uses aluminum alloy for stiff mounting on machine frames.
  • Upper and lower cases use PPS with GF40% for heat and chemical resistance.
  • The front cover combines polycarbonate and SUS304 for impact strength.
  • Transmitter weight is 170 g and receiver weight is 170 g.
  • Optical synchronization removes the need for dedicated sync wiring between units.
  • The detection mode turns ON only when all beam axes receive light.

Installation Guide

  • Mount the transmitter and receiver facing each other within the 0.3 to 12 m range.
  • Align both units so the effective angular aperture stays within ±2.5° at 3 m or above.
  • Keep the 10 mm beam axis spacing clear of fixtures, cables and moving parts.
  • Wire the 24 VDC supply with Class 2 isolation and keep ripple below 10% P-P.
  • Connect the two PNP OSSD outputs to the safety relay or controller input.
  • Set the series connection switch when you install two units side by side.
  • Verify response time of max. 4.8 ms against your machine stopping distance.
  • Confirm IP65/IP67 seals stay intact after routing cables through the gland.
  • Test the detection height of 220 mm with a ø14 mm test rod before production.

Packing List

  • Keyence GL-VM23FP transmitter unit x1
  • Keyence GL-VM23FP receiver unit x1
  • Mounting brackets and fixing screws
  • Instruction sheet for the GL-V series
  • Protective packaging for safe transport

Shipping

  • We ship worldwide through FedEx, UPS and DHL.
  • We dispatch stock items within 5 days after order confirmation.
  • We provide tracking numbers once the carrier collects the parcel.

FAQ

  • Q: What is the minimum detectable object size of the GL-VM23FP?
    A: The GL-VM23FP detects objects as small as ø14 mm, which suits finger protection.
  • Q: How many beam axes does this light curtain have?
    A: It offers 23 beam axes with 10 mm spacing and a 220 mm detection height.
  • Q: What detecting distance does the GL-VM23FP support?
    A: The unit works from 0.3 to 12 m between transmitter and receiver.
  • Q: What is the response time of the OSSD output?
    A: The OSSD response time reaches max. 4.8 ms on channel 0 from ON to OFF.
  • Q: Which output type does the GL-VM23FP provide?
    A: It provides two PNP transistor outputs for safety signal switching.
  • Q: How much current does the unit draw?
    A: The transmitter draws max. 66 mA and the receiver draws max. 76 mA.
  • Q: What protection rating does the housing offer?
    A: The housing meets IP65/IP67, so it resists dust and water ingress.
  • Q: What is the operating temperature range?
    A: The unit operates from -30 to +55 °C without freezing.
  • Q: Is the product new and original?
    A: Yes, we supply brand new original units, and we keep stock ready.
  • Q: How fast do you ship, and which carriers do you use?
    A: We ship within 5 days via DHL, FedEx and UPS.
  • Q: Do you accept returns?
    A: Yes, we support returns within 30 days of delivery.

Fast & Reliable Shipping

Quick worldwide delivery

keeps your automation projects on schedule.

Genuine & Trusted

All components are 100% authentic

ensuring reliable performance for your systems.

  • Express Delivery
  • 12 Months Warranty
  • 30 Days Easy Returns
View Product Details

Customer Support

Get Help When You Need It Most