Bently Nevada 330103-05-10-10-02-00 3300 XL Probe

330103-05-10-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330103-05-10-10-02-00
• Series: 3300 XL 8 mm Proximity Probes
• Probe Type: 330103, M10 x 1 thread, without armor
• Unthreaded Length: 05 = 50 mm
• Overall Case Length: 10 = 100 mm
• Total Length: 10 = 1.0 meter (3.3 feet)
• Connector and Cable: 02 = Miniature coaxial ClickLoc connector, standard cable
• Agency Approval: 00 = Not required
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 303 or 304 stainless steel (SST)
• Probe Case Thread: M10 x 1
• Maximum Thread Engagement Length: 15 mm
• Probe Weight: 323 g/m (11.4 oz)
• Nominal DC Resistance: 7.59 ± 0.50 Ω from center conductor to outer conductor at 1.0 m

Measurement Performance

• Linear Range: 2 mm (80 mils), starting at approximately 0.25 mm (10 mils) from target
• Linear Range Voltage: Approximately –1 to –17 Vdc
• Recommended Gap for Radial Vibration: –9 Vdc, about 1.27 mm (50 mils)
• Field Wiring: 0.2 to 1.5 mm² (16 to 24 AWG), 3 conductor shielded triad cable recommended
• Maximum Field Wiring Length: 305 meters (1,000 feet) between 3300 XL Proximitor Sensor and monitor
• Frequency Response: See Figures 10 and 12 for signal rolloff at high frequencies with longer field wiring

Environmental and Temperature Range

• Standard Probe Operating and Storage: –52°C to +177°C (–62°F to +350°F)
• Extended Temperature Range Probe Tip: –52°C to +218°C (–62°F to +425°F)
• Extended Temperature Range Cable and Connector: –51°C to +260°C (–60°F to +500°F)
• Low Temperature Caution: Exposing the probe below –34°C (–30°F) may cause premature pressure seal failure
• Relative Humidity: Less than 3% change in Average Scale Factor (ASF) after 93% humidity testing per IEC 68 2 3 for up to 56 days
• Pressure Seal: Viton® O-ring seals differential pressure between probe tip and case

Approval and Safety Ratings

• Intrinsically Safe ia: Class I, Zone 0: AEx/Ex ia IIC T5…T1 Ga; Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III
• Nonincendive nA, ec: Class I, Zone 2: AEx/Ex nA IIC T5…T1 Gc; Class I, Division 2, Groups A, B, C, D; Class I, Zone 2: AEx/Ex ec IIC T5…T1 Gc
• EPL Ga and Gc Temperature Schedule: T1 –55°C to +232°C; T2 –55°C to +177°C; T3 –55°C to +120°C; T4 –55°C to +80°C; T5 –55°C to +40°C
• EPL Dc Temperature Schedule: T280°C @ Ta –55°C to +232°C; T225°C @ Ta –55°C to +177°C; T170°C @ Ta –55°C to +120°C; T130°C @ Ta –55°C to +80°C; T105°C @ Ta –55°C to +100°C; T90°C @ Ta –55°C to +40°C

Installation Guide

• Mount the probe with an M10 x 1 thread and keep thread engagement within 15 mm maximum.
• Set the recommended gap for radial vibration at –9 Vdc, approximately 1.27 mm (50 mils).
• Use 3 conductor shielded triad cable and tinned field wiring for stable signal transmission.
• Keep field wiring length at or below 305 meters (1,000 feet) between Proximitor Sensor and monitor.
• Review frequency response graphs in Figures 10 and 12 when using longer field wiring runs.
• Install with intrinsically safe zener barriers per drawing 141092 or with galvanic isolators for ia ratings.
• Install with nonincendive circuit connections per drawing 140979 for nA and ec ratings.

Package List

• 1 x Bently Nevada 330103-05-10-10-02-00 3300 XL 8 mm Proximity Probe
• 1 x Miniature coaxial ClickLoc connector with standard cable
• 1 x Viton® O-ring pressure seal
• 1 x Product identification label
• 1 x Protective shipping packaging

Shipping

• We ship worldwide by FedEx, UPS, and DHL.
• We dispatch in-stock items within 5 days.
• We provide tracking information after shipment.

FAQ

• Is this probe brand new and original? Yes, we supply brand new original products.
• Do you have stock for this model? Yes, we have stock available for immediate order processing.
• How fast do you ship? We ship within 5 days after order confirmation.
• Which couriers do you use? We use FedEx, UPS, DHL, and other common express services.
• What is the linear range of this probe? The linear range is 2 mm (80 mils), starting at about 0.25 mm (10 mils) from the target.
• What gap setting do you recommend for radial vibration? Bently Nevada recommends –9 Vdc, approximately 1.27 mm (50 mils).
• What is the standard operating temperature range? The standard probe handles –52°C to +177°C (–62°F to +350°F).
• What is the nominal DC resistance? The nominal resistance is 7.59 ± 0.50 Ω at 1.0 m.
• Does this probe include agency approval? This model uses option 00, so agency approval is not required or included.
• Can I return the product? Yes, we support returns within 30 days.

Contact Information

• Inquiries: sales@nex-auto.com
• Phone/WhatsApp: +86 153 9242 9628
• Partner: NexAuto Technology Limited