Bently Nevada 330103-00-06-15-02-CN Proximity Probe

Bently Nevada 330103-00-06-15-02-CN Proximity Probe – 3300 XL 8 mm Series

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330103-00-06-15-02-CN
• Series: 3300 XL 8 mm
• Category: Proximity Probes
• Linear Range: 2 mm (80 mils), from 0.25 mm to 2.3 mm (10 to 90 mils)
• Recommended Gap for Radial Vibration: -9 Vdc (about 1.27 mm / 50 mils)
• Nominal DC Resistance: 7.73 ± 0.50 Ω at 1.5 m length
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 303 or 304 stainless steel
• Thread Type: M10 x 1, without armor
• Unthreaded Length: 0 mm
• Overall Case Length: 60 mm
• Total Length: 1.5 meters (4.9 feet)
• Connector Type: Miniature coaxial ClickLoc connector, standard cable (no protector)
• Agency Approval: CN = Country Specific
• Probe Weight: 323 g/m (11.4 oz)
• Pressure Seal: Viton O-ring, designed for differential pressure sealing (not pressure tested before shipment)

Temperature and Environmental Performance

• Standard Probe Operating Range: -52°C to +177°C (-62°F to +350°F)
• Extended Temperature Range (Probe Tip): -52°C to +218°C (-62°F to +425°F)
• Extended Temperature Range (Cable and Connector): -51°C to +260°C (-60°F to +500°F)
• Low Temperature Caution: Exposing the probe below -34°C (-30°F) may cause premature pressure seal failure.
• Relative Humidity: Less than 3% change in Average Scale Factor (ASF) after 56 days at 93% humidity (IEC 68-2-3)
• Field Wiring: 0.2 to 1.5 mm² (16 to 24 AWG), recommended 3-conductor shielded triad cable with tinned ends
• Maximum Field Wiring Length: 305 meters (1,000 feet) between Proximitor sensor and monitor

Installation and Mechanical Guidelines

• Thread Engagement: M10 x 1, maximum 15 mm length of thread engagement
• Probe Case Torque (Standard Forward Mount): Maximum 33.9 N·m (300 in·lbf), Recommended 11.2 N·m (100 in·lbf)
• Probe Case Torque (First Three Threads): Maximum 22.6 N·m (200 in·lbf), Recommended 7.5 N·m (66 in·lbf)
• Gap Setting: Set radial vibration gap to approximately -9 Vdc (1.27 mm / 50 mils)
• Wiring Practice: Use shielded triad cable and keep field wiring under 305 meters for best signal integrity
• High-Frequency Note: Longer field wiring can reduce signal roll-off; refer to frequency response graphs in the manual

Hazardous Area Approvals

• Intrinsically Safe (ia): Class I, Zone 0: AEx/Ex ia IIC T5…T1 Ga; Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III
• Nonincendive (nA, ec): Class I, Zone 2: AEx/Ex nA IIC T5…T1 Gc; Class I, Division 2, Groups A, B, C, D; Class I, Zone 2: AEx/Ex ec IIC T5…T1 Gc
• Temperature Schedule (EPL Ga and Gc): T1: -55°C to +232°C; T2: -55°C to +177°C; T3: -55°C to +120°C; T4: -55°C to +80°C; T5: -55°C to +40°C
• Temperature Schedule (EPL Dc): T280°C: -55°C to +232°C; T225°C: -55°C to +177°C; T170°C: -55°C to +120°C; T130°C: -55°C to +80°C; T105°C: -55°C to +100°C; T90°C: -55°C to +40°C

Frequently Asked Questions

• What is the linear range of this probe? The linear range is 2 mm (80 mils), from 0.25 mm to 2.3 mm (10 to 90 mils).
• What gap setting should I use for radial vibration? Set the gap to -9 Vdc, which is about 1.27 mm (50 mils).
• What is the total cable length? This model comes with a 1.5 meter (4.9 feet) standard cable.
• What is the case length of this probe? The overall case length is 60 mm, and the unthreaded length is 0 mm.
• What does the CN approval option mean? CN stands for Country Specific agency approval.
• What is the maximum thread engagement? The M10 x 1 thread allows a maximum engagement of 15 mm.
• What torque should I apply to the probe case? For standard forward mount, the recommended torque is 11.2 N·m (100 in·lbf). The maximum is 33.9 N·m (300 in·lbf).
• What is the difference between the 01 and 02 connector options? The 01 option includes a connector protector, while the 02 option uses the connector without a protector.
• What is the probe tip material? The tip uses polyphenylene sulfide (PPS), and the case is AISI 303 or 304 stainless steel.
• How fast do you ship? We ship within 5 days using FedEx, UPS, DHL, or similar carriers.
• What is your return policy? We support 30-day returns for this product.

Contact Information

Inquiries: sales@nex-auto.com
Phone/WhatsApp: +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/