A02B-0047-C310 FANUC Operator Control Panel

A02B-0047-C310 FANUC Operator Control Panel with 7-Segment LED Indicators for System 3/5/6 CNC

Technical Specifications

• Brand: FANUC
• Model: A02B-0047-C310
• Series: FANUC System 3/5/6 CNC
• Category: Operator control panel with 7-segment LED indicators
• Indicators: 7-segment LED displays (supplier-reported, multi-source consensus)
• Layout: Operator control panel (supplier-reported)
• Communication Ports: Not applicable — passive component with no built-in ports
• Supply Voltage: Not published by the manufacturer for this order code
• Power Consumption: 25 W (supplier-reported, single source)
• Operating Temperature: 0 to 55 °C (family-level reference; confirm for your order code)
• Storage/Transport Temperature: −20 to 60 °C (family-level reference)
• Relative Humidity: 75%RH or less, no condensation
• Dimensions (H×W×D): Not published by the manufacturer
• Weight: Not published by the manufacturer

Key Features and Environmental Ratings

• The 7-segment LED indicators give operators fast, readable status feedback at the panel.
• The 0 to 55 °C operating range fits most machine-shop floors.
• Storage and transport stay safe between −20 and 60 °C.
• Humidity tolerance holds at 75%RH or less with no condensation.
• The 25 W power draw keeps heat load low inside the cabinet.
• Aftermarket sources reference Ikegai FX machines, which helps buyers match the right panel.
• No built-in communication ports mean fewer failure points in the field.

Installation Guide

• Confirm the host machine matches the FANUC System 3/5/6 family before you order.
• Power down the CNC and lock out the main breaker before you start.
• Remove the old panel and label each connector to speed up reinstallation.
• Seat the new panel into the cutout and secure the mounting screws.
• Reconnect each harness to the matching terminal on the rear of the panel.
• Route wires away from spindle drives and high-current lines to cut noise.
• Power up and check every 7-segment display against the machine reference.

Packing List

• One A02B-0047-C310 operator control panel
• Protective shipping carton with foam padding
• Order confirmation and packing slip
• Shipment via FedEx, UPS, or DHL

FAQ

• Q: What indicators does this panel use?
  A: The A02B-0047-C310 uses 7-segment LED displays for status readouts.
• Q: Which CNC series does this panel support?
  A: It supports the FANUC System 3/5/6 CNC family of early controls.
• Q: What is the power consumption?
  A: A single supplier source reports 25 W, and you should confirm this for your build.
• Q: What operating temperature does the panel tolerate?
  A: The family reference range is 0 to 55 °C, so confirm it for your order code.
• Q: Does the panel include communication ports?
  A: No. It works as a passive component with no built-in communication ports.
• Q: What is the condition and stock status?
  A: We offer brand-new original units, and we hold stock for immediate order processing.
• Q: How fast do you ship?
  A: We dispatch within 5 days using DHL, FedEx, or UPS.
• Q: What is your return policy?
  A: We accept returns within 30 days of delivery.

Contact Information

• Inquiries: sales@nex-auto.com
• Phone/WhatsApp: +86 153 9242 9628
• Partner NexAuto Technology Limited: https://www.nex-auto.com/