A02B-0030-C004 FANUC Series 5 MDI Keypad Panel

A02B-0030-C004 FANUC Series 5 MDI Keypad Panel

Technical Specifications

• Brand: FANUC
• Model: A02B-0030-C004
• Series: FANUC Series 5 CNC
• Category: MDI front operator interface keypad panel
• Input type: MDI keypad / operator front panel (supplier-reported)
• Display: 7-segment display integrated into the MDI panel
• Compatible with: FANUC Series 5 CNC (distributor-listed; verify against official documentation)
• Communication: Not applicable; passive component with no built-in ports
• Supply voltage: Not published by the manufacturer for this order code
• Operating temperature: 0 to 55 °C (family-level reference per B-61393E p.112; not confirmed for this order code)
• Storage/transport temperature: −20 to 60 °C (family-level reference per B-61393E p.112)
• Relative humidity: 75%RH or less, no condensation
• Dimensions (H×W×D): Not published as a numerical table
• Weight: ~1.47 kg (supplier-reported single source; DO Supply)
• Lifecycle: Legacy part for early FANUC CNC generations; superseded by i-series / 30i-B; no official EOS date verified (last verified 2026-09)

Installation Guidance

• Power down the CNC control and isolate the supply before you begin.
• Photograph the ribbon cables and connectors before you remove the old panel.
• Match the replacement A02B-0030-C004 against the original mounting holes.
• Seat every connector fully and check the keypad membrane alignment.
• Test each MDI key and the 7-segment display after power-up.
• Confirm humidity stays below 75%RH with no condensation in the cabinet.

Packaging List

• One A02B-0030-C004 MDI keypad panel assembly
• Integrated 7-segment display (as supplied)
• Anti-static protective packaging
• Protective foam or corner cushioning

Shipping and Support

• We ship through FedEx, UPS, and DHL.
• We dispatch in-stock items within 5 business days.
• We accept returns within 30 days of delivery.
• All units ship brand new and original.

FAQ

• Q: Which control does the A02B-0030-C004 fit?
  A: Distributors list it for the FANUC Series 5 CNC, though you should verify against official documentation.
• Q: Does the panel include a display?
  A: Yes. The MDI panel integrates a 7-segment display.
• Q: Does this panel have communication ports?
  A: No. It is a passive component with no built-in communication interfaces.
• Q: What operating temperature applies?
  A: The family reference is 0 to 55 °C, though FANUC does not confirm it for this order code.
• Q: What humidity range does the panel tolerate?
  A: It tolerates 75%RH or less with no condensation.
• Q: How much does the panel weigh?
  A: One supplier reports roughly 1.47 kg.
• Q: Is this item in stock and how fast does it ship?
  A: We hold stock and dispatch within 5 days via DHL, FedEx, or UPS.
• Q: What is the return policy?
  A: We accept returns within 30 days.