330709-000-040-10-12-00 3300 XL 11mm Probe Bently Nevada

330709-000-040-10-12-00 3300 XL 11 mm Proximity Probe by Bently Nevada

• Brand & Model: Bently Nevada, 330709-000-040-10-12-00 (3300 XL 11 mm Probe).
• Case Length: 40 mm overall case length.
• Agency Approval: Not required (option 00).
• Probe DC Resistance: 5.9 ± 0.5 ohms (center to outer conductor at 1.0 m).
• Target & Shaft Diameter: Minimum flat target 30.5 mm (1.2 in); shaft diameter 152 mm (6.0 in).
• Cross-talk Limitation: Engineered to minimize interference in dense installations.
• Probe Tip Material: Polyphenylene sulfide (PPS) for durability.
• Probe Case Material: AISI 304 stainless steel (SST).
• Cable Specification: 75 Ω triaxial, FEP insulated, available in 1, 5, or 9 metre lengths.
• Case Thread: M16x1.5 with maximum thread engagement of 24 mm.
• Recommended Case Torque: 21.1 N•m (187 in•lb); maximum 63.3 N•m (560 in•lb).
• Connector Torque: Finger tight recommended; maximum 0.565 N•m (5 in•lb).
• Minimum Bend Radius: 25.4 mm (1.0 in) with or without SST armor.
• Operating Temperature Range: -52°C to +177°C (-62°F to +351°F).
• Temperature Classifications: T1 to T5 for EPL Ga/Gc; T280°C to T90°C for EPL Dc.
• Made in U.S.A. – manufactured to Bently Nevada's quality standards.

FAQ – Frequently Asked Questions

• What approvals does the 330709-000-040-10-12-00 carry?
  This probe has Option 00 – agency approval is not required.
• What is the case length of this probe?
  The overall case length is 40 mm.
• What is the exact DC resistance of this probe?
  Resistance from center to outer conductor is 5.9 ± 0.5 ohms at 1.0 metre.
• Can I use this probe in high-temperature environments?
  Yes, it operates from -52°C to +177°C; see temperature classification table for limits.
• What is the recommended torque for the M16x1.5 case?
  Apply 21.1 N•m; never exceed 63.3 N•m.
• Does this probe include armor?
  No, the 330709-000-040-10-12-00 comes without armor.
• What connector type does this probe use?
  It uses a miniature coaxial ClickLoc connector with FluidLoc cable.
• Is this probe suitable for shaft vibration monitoring?
  Yes, for shafts with minimum diameter of 152 mm (6.0 in).
• What is the minimum target size for accurate readings?
  Flat target must be at least 30.5 mm in diameter.
• Do you have this probe in stock?
  Yes, we maintain stock for immediate shipment.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628  |  Partner NexAuto Technology Limited