330709-000-030-50-02-00 Bently Nevada Proximity Probe 3300 XL

Bently Nevada 3300 XL 11 mm Proximity Probe – Model 330709-000-030-50-02-00

• Brand & Series: Bently Nevada – 3300 XL 11 mm Proximity Probe.
• Model Number: 330709-000-030-50-02-00 (complete with all options).
• Unthreaded Length: 0 mm (standard configuration).
• Overall Case Length: 30 mm (fits most mounting fixtures).
• Total Probe Length: 5.0 meters (16.4 feet) – designed exclusively for 5-meter Proximitor sensors.
• Connector: Miniature coaxial ClickLoc with standard cable.
• Agency Approval: Not required (option 00).

Electrical & Performance Specifications

• DC Resistance (RPROBE): 7.2 ± 0.8 ohms between center and outer conductors.
• Target Size (Flat Surface): Recommended minimum diameter 30.5 mm (1.2 in).
• Shaft Diameter: Recommended minimum 152 mm (6.0 in) to avoid cross-talk.
• Probe Tip Material: Polyphenylene sulfide (PPS) for durability.
• Probe Case Material: AISI 304 stainless steel (SST) resists corrosion.
• Cable Type: 75 Ω triaxial, FEP insulated, total lengths 1, 5, or 9 meters.

Mechanical & Installation Guidelines

• Case Thread: M16 x 1.5 with maximum thread engagement 24 mm.
• Recommended Case Torque: 21.1 N•m (187 in•lb). Maximum rated 63.3 N•m (560 in•lb).
• Connector Torque: Finger tight recommended; maximum 0.565 N•m (5 in•lb).
• Minimum Bend Radius: 25.4 mm (1.0 in) with or without SST armor.
• Temperature Range (Operating & Storage): -52°C to +177°C (-62°F to +351°F).
• Important Note: Exposing the probe below -34°C (30°F) may damage the pressure seal.

Frequently Asked Questions (FAQ)

• Is this probe brand new? – Yes, we supply only genuine, new Bently Nevada 3300 XL probes.
• Can I use this 5m probe with a 9m Proximitor? – No, the 5-meter design works exclusively with 5-meter Proximitor sensors.
• What is the minimum target diameter? – For flat surfaces, use at least 30.5 mm; for shafts, minimum 152 mm.
• Does the cable resist high temperatures? – Yes, FEP insulation supports -52°C to +177°C.
• What torque should I apply to the case? – We recommend 21.1 N•m; do not exceed 63.3 N•m.
• How do I connect the ClickLoc connector? – Hand-tighten only; maximum torque 0.565 N•m.

Contact Information Inquiries: sales@nex-auto.com ， +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/