330703-000-060-10-11-05 Bently Nevada 3300 XL 11 mm Probe

330703-000-060-10-11-05 Bently Nevada 3300 XL 11 mm Proximity Probe

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330703-000-060-10-11-05
• Series: 3300 XL 11 mm Proximity Probes, Metric
• Category: Proximity Probe / Eddy Current Sensor
• Condition: New & Original in Factory Packing
• Factory Warranty: 12 Months
• Probe Type: 3300 XL 11 mm Probe, M14 x 1.5 thread, without armor
• Unthreaded Length: 00 mm
• Overall Case Length: 60.0 mm
• Total Length: 1.0 meter (3.3 feet)
• Connector and Cable Type: Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable
• Agency Approval: Multiple approvals (05)
• Probe DC Resistance: 5.9 Ω ± 0.5 Ω from center conductor to outer conductor at 1.0 m
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 304 stainless steel (SST)
• Probe Cable: 75 Ω triaxial, fluoroethylene propylene (FEP) insulated cable, available in 1, 5, or 9 meter lengths
• Probe Case Thread: M14 x 1.5 with 21 mm maximum thread engagement

Magnetic Field Immunity

• Test Condition: 60 Hz magnetic fields up to 300 Gauss on a 5 meter system
• Output at 0.5 mm (20 mil) Gap: 0.001 mil pp/gauss
• Output at 2.5 mm (100 mil) Gap: 0.009 mil pp/gauss
• Output at 4.6 mm (180 mil) Gap: 0.027 mil pp/gauss

Temperature and Environmental Performance

• Operating and Storage Temperature: –52°C to +177°C (–62°F to +351°F)
• Low Temperature Caution: Temperatures below –34°C (–30°F) may cause premature pressure seal failure
• Pressure Seal: Viton® O-ring seals differential pressure between probe tip and case
• Probe Cable Insulation: FEP-insulated triaxial cable resists harsh chemicals and moisture

Temperature Classification Schedule (Probe Only)

• EPL Ga and Gc – T1: Ambient –55°C to +232°C
• EPL Ga and Gc – T2: Ambient –55°C to +177°C
• EPL Ga and Gc – T3: Ambient –55°C to +120°C
• EPL Ga and Gc – T4: Ambient –55°C to +80°C
• EPL Ga and Gc – T5: Ambient –55°C to +40°C
• EPL Dc – T280°C @ Ta: Ambient –55°C to +232°C
• EPL Dc – T225°C @ Ta: Ambient –55°C to +177°C
• EPL Dc – T170°C @ Ta: Ambient –55°C to +120°C
• EPL Dc – T130°C @ Ta: Ambient –55°C to +80°C
• EPL Dc – T105°C @ Ta: Ambient –55°C to +100°C
• EPL Dc – T90°C @ Ta: Ambient –55°C to +40°C

Installation Guide

• Mount the probe with an M14 x 1.5 thread and respect the 21 mm maximum thread engagement.
• Apply the recommended torque of 21.1 N·m (187 in·lbf) for standard mounting.
• Never exceed the maximum rated torque of 63.3 N·m (560 in·lbf).
• Use the connector protector to shield the ClickLoc connector from mechanical damage.
• Route the FluidLoc cable away from high-temperature zones and sharp edges.
• Connect the probe to a compatible 3300 XL Proximitor sensor and monitor.
• Avoid exposing the probe to temperatures below –34°C (–30°F) to protect the pressure seal.

Package List

• 1 x Bently Nevada 330703-000-060-10-11-05 3300 XL 11 mm Proximity Probe
• 1 x Miniature coaxial ClickLoc connector with connector protector
• 1 x 1.0 meter FluidLoc cable (FEP insulated, 75 Ω triaxial)
• 1 x Viton® O-ring pressure seal (installed)
• Protective packaging for safe transport

Shipping

• We ship worldwide via FedEx, UPS, and DHL.
• Orders leave our warehouse within 5 days after payment confirmation.
• We provide tracking information once the carrier picks up your package.

FAQ

• Q: What is the thread size of the 330703-000-060-10-11-05 probe?
  A: The probe uses an M14 x 1.5 thread with 21 mm maximum thread engagement.
• Q: What is the nominal DC resistance of this probe?
  A: The nominal resistance is 5.9 Ω ± 0.5 Ω at 1.0 meter.
• Q: What cable type does this probe use?
  A: It uses a 75 Ω triaxial, FEP-insulated FluidLoc cable with a ClickLoc connector and protector.
• Q: What is the operating temperature range?
  A: The probe operates from –52°C to +177°C (–62°F to +351°F).
• Q: How does this probe handle magnetic fields?
  A: It shows minimal output error even in 60 Hz fields up to 300 Gauss.
• Q: What is the recommended installation torque?
  A: Use 21.1 N·m (187 in·lbf), and never exceed 63.3 N·m (560 in·lbf).
• Q: What is the probe tip material?
  A: The probe tip uses polyphenylene sulfide (PPS).
• Q: What is the probe case material?
  A: The probe case uses AISI 304 stainless steel.
• Q: Does this probe come with agency approvals?
  A: Yes, option 05 provides multiple agency approvals.
• Q: Is the probe pressure tested before shipment?
  A: No, probes are not pressure tested before shipment.
• Q: Do you have this item in stock?
  A: Yes, we have it in stock and ready to ship.
• Q: What is your return policy?
  A: We support 30-day returns.
• Q: Is this product new and original?
  A: Yes, it is brand new and original in factory packing.

Contact Information

Inquiries: sales@nex-auto.com or +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/