330101-00-28-20-12-05 Bently Nevada 3300 XL 8 mm Probe FluidLoc

330101-00-28-20-12-05 Bently Nevada 3300 XL 8 mm Probe with FluidLoc

• Manufacturer & Series: Bently Nevada, 3300 XL series. The 330101-00-28-20-12-05 is a fully certified 8 mm probe with FluidLoc cable.
• Linear Range: 2 mm (80 mils) starting at 0.25 mm (10 mils) from the target.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ±5% over 0°C to +45°C for 5m systems.
• Probe Tip Material: Polyphenylene sulfide (PPS) with patented TipLoc molding for superior durability.
• Case Material & Thread: AISI 303/304 stainless steel with 3/8-24 UNF thread. Maximum thread engagement is 0.563 inches.
• FluidLoc Cable: Prevents oil and other liquids from leaking through the cable interior.
• Temperature Range (Standard): Operating from -52°C to +177°C (-62°F to +350°F).
• Pressure Seal: Viton® O-ring design. Contact our custom design department for pressure testing.
• Humidity Tolerance: Less than 3% change in Average Scale Factor after 56 days at 93% RH (IEC 68-2-3).
• Agency Approvals: Includes CSA, ATEX, and IECEx certifications (option 05).
• Nominal DC Resistance: 7.88 ± 0.50 Ω for 2.0m probe length.
• Extension Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical.
• Field Wiring: 0.2 to 1.5 mm² (16-24 AWG), shielded triad, max 305 meters.
• Weight: 323 g/m (11.4 oz).

Frequently Asked Questions

• Q: Is the 330101-00-28-20-12-05 compatible with 3300 XL extension cables?
  A: Yes, it works with all 3300 XL 8 mm extension cables and proximity systems.
• Q: What is the maximum field wiring length?
  A: The maximum length between sensor and monitor is 305 meters (1,000 feet).
• Q: Can I use this probe in high-temperature environments?
  A: The standard probe supports up to +177°C. ETR version supports up to +218°C at the tip.
• Q: What is the linear range of this probe?
  A: Linear range is 2 mm (80 mils) from 0.25 mm to 2.3 mm, with scale factor 7.87 V/mm.
• Q: Do you have the 330101-00-28-20-12-05 in stock?
  A: Yes, we maintain stock and ship within 5 days of your order.
• Q: What torque should I use for installation?
  A: Recommended torque is 11.2 N•m (100 in•lbf) for standard forward mount probes.
• Q: What is the FluidLoc cable option?
  A: FluidLoc prevents oil and liquids from leaking out of the machine through the cable interior.
• Q: Are these probes pressure tested before shipment?
  A: Not routinely. Contact our custom design department if you require pressure seal testing.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/