10024/F/F Honeywell Control Board Industrial PLC DCS

Honeywell 10024/F/F Circuit Control Board

• Brand & Model: Honeywell, 10024/F/F – a dedicated circuit control board.
• Application Type: Industrial control logic, signal conditioning, and actuator driving.
• Processor Core: 32-bit RISC microcontroller for fast loop execution.
• Input Voltage: 24 VDC nominal (range: 18–32 VDC) with reverse polarity protection.
• Digital I/O Count: 8 isolated inputs (24V) and 8 solid-state outputs (0.5A each).
• Analog Channels: 4 differential analog inputs (0–10V or 4–20mA configurable).
• Communication Ports: 2 x RS-485 (Modbus RTU) and 1 x Ethernet (Modbus TCP).
• Operating Temperature: -40°C to +75°C for extreme industrial sites.
• Storage Temperature: -55°C to +85°C ensures durability during logistics.

Technical Specifications & Performance

• Measurement Range: 0–10 VDC or 4–20 mA for analog input channels.
• Frequency Response: 100 Hz for analog signals, suitable for slow process variables.
• Resolution: 12-bit ADC per analog input for adequate process granularity.
• Linearity Error: < 0.2% of full-scale over the entire temperature range.
• Output Drive: Each digital output handles up to 0.5A DC (short-circuit protected).
• Isolation Voltage: 1500 Vrms between field side and logic side for safety.
• Environmental Tolerance: Withstands 5 g vibration and 95% humidity (non-condensing).
• EMC Immunity: Meets EN 61000-6-2 for industrial heavy-duty environments.

Installation Guidelines

• Mount the board inside a grounded control cabinet using the four corner holes.
• Use M4 screws with lock washers to secure the board against vibration.
• Connect the 24 VDC power supply to the two-terminal block (V+ and V-).
• Wire field devices to the removable screw terminals for easy maintenance.
• Set the DIP switches for Modbus address and baud rate before powering on.
• Check all wiring connections for proper torque (0.5 Nm) to avoid loose contacts.
• Ground the board's functional earth terminal to reduce electrical noise.

Package Contents

• 1 x Honeywell 10024/F/F circuit control board (fully tested).
• 1 x 8-position terminal block (plug-in type) for power and I/O wiring.
• 1 x 10-pin ribbon cable for optional expansion interface.
• 1 x Quick Reference Guide with basic wiring and DIP switch settings.
• No additional mounting hardware included (uses standard M4 screws).

Shipping & Logistics

• We ship via FedEx, UPS, or DHL with tracking numbers provided.
• Orders dispatch within 5 business days from our central warehouse.
• All boards are brand new, original Honeywell factory stock.
• We maintain sufficient inventory for immediate fulfillment.
• Customers may return unused items within 30 days of delivery.

Frequently Asked Questions (FAQ)

• Q: Is the 10024/F/F compatible with 12 VDC systems?
  A: No, the board requires 24 VDC nominal; 12 VDC will not activate the onboard regulators.
• Q: Can I use this board in a SIL-rated safety loop?
  A: This standard version is not SIL-rated; refer to Honeywell's safety-specific variants.
• Q: What protocol does the Ethernet port support?
  A: The Ethernet port supports Modbus TCP for easy integration with SCADA systems.
• Q: How do I set the Modbus address?
  A: Use the DIP switch block (positions 1–6) to set the binary address per the manual.
• Q: What is the maximum cable length for RS-485?
  A: Up to 1200 meters at 9600 baud, using shielded twisted-pair cable.
• Q: Does the board include any firmware protection?
  A: Yes, it features write-protect jumper and secure boot options to prevent unauthorized changes.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited