TSXDEY16D2 Schneider Modicon Premium 16-Point 24V DC Input Module

TSXDEY16D2 – Schneider Electric Modicon Premium 16-Point Discrete Input Module

Main Characteristics

• Product range: Modicon Premium automation platform from Schneider Electric.
• Component type: Discrete input module with 16 isolated current-sink inputs.
• Input standard: Channels conform to EN/IEC 61131-2 type 2 specifications.
• Input voltage: The module reads 24V DC positive signals on every channel.
• Sensor supply: Built-in sensor power delivers 19 to 30V for connected devices.
• Sensor compatibility: Inputs accept 2-wire and 3-wire proximity sensors per EN/IEC 60947-5-2.
• Input current: Each channel draws 7 mA during normal operation.

Technical Parameters

• Brand: Schneider Electric builds this module to strict factory standards.
• Model: TSXDEY16D2 identifies the 16-channel 24V DC input variant.
• Series: Modicon Premium racks support this module directly.
• State 1 voltage: The module guarantees state 1 at 11V or higher.
• State 1 current: State 1 requires at least 6.5 mA.
• State 0 voltage: State 0 stays at 5V or lower.
• State 0 current: State 0 never exceeds 2 mA.
• Input impedance: Each channel shows 4000 Ohm in state 1.
• Response time: Typical response measures 4 ms, with a maximum of 7 ms.
• Insulation resistance: Resistance stays below 10 MOhm at 500V DC.
• Power dissipation: Base draw is 1 W plus 0.15 W per active channel.

Electrical and Connection Data

• Electrical connection: Screw terminals provide secure field wiring.
• Current consumption: The module pulls 135 mA at 24V DC and 80 mA at 5V DC.
• Dielectric strength: Isolation reaches 1500V AC at 50/60 Hz.
• Module format: Standard format fits one slot on the backplane.
• Marking: The CE mark confirms European conformity.

Environmental Tolerance

• Operating temperature: The module runs from 0 to 60 °C in active service.
• Storage temperature: Safe storage spans -25 to 70 °C.
• Humidity: Operation tolerates 10 to 95 % relative humidity without condensation.
• Storage humidity: Storage accepts 5 to 95 % relative humidity without condensation.
• Altitude: The unit operates from 0 to 2000 m above sea level.
• Protection rating: IP20 guards the module inside clean control cabinets.
• Pollution degree: The design suits pollution degree 2 environments.
• Protective treatment: TC treatment adds resistance against harsh conditions.
• Anti-interference: The 1500V AC barrier blocks noise between field and bus.

Standards and Certifications

• Standards: The module meets 73/23/EEC, 89/336/EEC, 92/31/EEC, and 93/68/EEC directives.
• Safety standards: Compliance covers EN/IEC 61131-2, IEC 60664, UL 508, and CSA C22.2.
• Hazardous area: CSA C22.2 No 213 covers Class I Division 2 Groups A through D.
• Certifications: Approvals include ABS, BV, DNV, GL, LR, RINA, and RMRS.

Physical Details

• Weight: The module weighs 0.3 kg for straightforward handling.
• Format: Standard module format simplifies rack planning.

Installation Guide

• Power down the rack before you insert the module into its slot.
• Align the unit with the backplane connector and push it firmly home.
• Tighten the mounting screw to protect against vibration.
• Connect 24V DC field wiring to the screw terminals with correct polarity.
• Verify sensor supply voltage stays within the 19 to 30V range.
• Test each channel by toggling inputs and checking status indicators.

Package Contents

• One Schneider TSXDEY16D2 discrete input module.
• Original factory protective packaging.
• Product documentation included in the box.

Shipping Information

• We ship orders within 5 days of payment confirmation.
• Delivery partners include FedEx, UPS, and DHL for worldwide coverage.
• Every shipment carries tracking details for full visibility.

FAQ

• Is the module new and original? Yes, we supply brand-new original units in factory packaging.
• Do you keep stock? Yes, we hold ready stock for quick fulfillment.
• How fast do you ship? We dispatch goods within 5 days after order confirmation.
• Which couriers do you use? We use DHL, FedEx, and UPS for international delivery.
• Can I return the product? Yes, our return window covers 30 days after delivery.
• What input voltage does the module accept? It reads 24V DC positive signals.
• Which sensors can I connect? Inputs accept 2-wire and 3-wire proximity sensors per EN/IEC 60947-5-2.
• What is the response time? Typical response measures 4 ms, with 7 ms maximum.
• How much current does each channel draw? Every channel draws 7 mA.
• What is the operating temperature range? The module runs from 0 to 60 °C.
• How do I wire the module? Screw terminals provide the electrical connection.
• How much does the module weigh? The unit weighs 0.3 kg.

Contact Information Inquiries: sales@nex-auto.com or +86 153 9242 9628.

Partner NexAuto Technology Limited: https://www.nex-auto.com/