IV4-LG6C Keyence AI Imaging Illumination Unit - White LED

IV4-LG6C Keyence AI Imaging Illumination Unit – White LED for IV4 Series

Key Technical Specifications

• Brand: Keyence
• Model: IV4-LG6C
• Series: IV4 Series
• Category: AI imaging illumination unit
• Illumination type: White LED
• Compatible sensor heads: IV4-HG600CA, IV4-G600CA
• Supply voltage: Power supplied via the connected amplifier
• Power consumption: Not specified by the manufacturer
• Output type: Not applicable to this unit
• Operating temperature: 0 to +50°C (no freezing)
• Relative humidity: 85% RH or less (no condensation)
• Protection rating: IP67 when attached to the applicable sensor
• IP67 exception: Not valid with polarizing filters OP-88644, OP-88645, OP-88646, OP-88647
• Dimensions (H×W×D): Not specified by the manufacturer
• Weight: Approx. 150 g
• Material – main case: Aluminum die-casting and PBT
• Material – sensor head connector: Zinc with nickel plating and PA
• Material – front cover: Acrylic
• Material – cable: PVC, nickel plating, TPEE
• ESD compliance: IEC61340-5-1
• Built-in ports: None
• Protocols: None
• Communication expansion: None
• Lifecycle status: Active (Keyence production status verified 2026-09)

Performance and Environmental Resistance

• The White LED light source gives consistent brightness for repeatable image capture.
• The unit operates across a temperature range of 0 to +50°C without freezing.
• Humidity tolerance reaches 85% RH or less with no condensation risk.
• The IP67 rating protects the assembly against dust and water ingress.
• IP67 protection applies only when the unit attaches to a compatible sensor head.
• Polarizing filters OP-88644 to OP-88647 cancel the IP67 protection claim.
• ESD-safe construction follows IEC61340-5-1 and limits static discharge damage.
• Aluminum die-casting and PBT materials resist vibration and daily wear.
• Zinc and nickel plating on the connector adds corrosion resistance.

Installation Guide

• Power off the IV4 amplifier and confirm zero voltage before you start work.
• Align the IV4-LG6C with the IV4-HG600CA or IV4-G600CA sensor head.
• Seat the connector firmly so the IP67 seal engages fully.
• Route the PVC cable away from heat sources and moving machine parts.
• Tighten all fasteners to the torque value in the Keyence IV4 manual.
• Check the seal and connector after installation to confirm IP67 protection.
• Power the amplifier and verify stable illumination before production starts.
• Inspect the unit at regular intervals for cable wear and loose connections.

Package Contents

• 1 × Keyence IV4-LG6C AI imaging illumination unit (White LED)
• 1 × Protective front cover
• 1 × Cable assembly
• 1 × Installation accessory set
• 1 × Quick reference guide

Shipping and Support

• We keep this unit in stock and ship orders within 5 days.
• We ship with FedEx, UPS, and DHL for fast global delivery.
• We accept returns within 30 days of delivery.
• Every unit is new and original from Keyence.

FAQ

• Q: Which sensor heads work with the IV4-LG6C?
  A: The unit supports the IV4-HG600CA and IV4-G600CA sensor heads.
• Q: What is the operating temperature range?
  A: The unit works from 0 to +50°C with no freezing.
• Q: Does the unit carry an IP67 rating?
  A: Yes, it reaches IP67 when attached to a compatible sensor head.
• Q: Does the IP67 rating hold with polarizing filters?
  A: No, filters OP-88644 to OP-88647 cancel the IP67 protection.
• Q: How does the unit receive power?
  A: The connected IV4 amplifier supplies power to the unit.
• Q: Do you keep this product in stock?
  A: Yes, we hold stock and ship within 5 days.
• Q: Which couriers do you use?
  A: We ship with FedEx, UPS, and DHL.
• Q: Can I return the product?
  A: Yes, we accept returns within 30 days.

Contact Information

• Inquiries: sales@nex-auto.com
• WhatsApp: +86 153 9242 9628
• Partner NexAuto Technology Limited: https://www.nex-auto.com/