IV2-G30 Keyence IV2 Series Standard Sensor Amplifier

IV2-G30 Keyence IV2 Series Standard Sensor Amplifier

Technical Specifications

• Brand: Keyence
• Model: IV2-G30
• Series: IV2 Series
• Type: Sensor amplifier, Standard type
• Available modes: Standard mode
• Detection tools: 16 tools
• Position adjustment tool: 1 tool
• Switch settings: 128 programs with SD card, 32 programs without
• Built-in port: RJ45 8-pin connector (100BASE-TX/10BASE-T)
• Protocols: EtherNet/IP, PROFINET, TCP/IP non-procedure comm, FTP client, SNTP client
• Communication expansion: EtherCAT, CC-Link, DeviceNet, PROFIBUS, RS-232C via DL Series communication unit
• Supply voltage: 24 VDC ±10% including ripple
• Power consumption: 1.8 A or less including communication unit and output load
• Output type: Open collector output, NPN/PNP switchable, N.O./N.C. switchable, maximum rating 26.4 V 50 mA
• Number of inputs: 8 (IN1 to IN8)
• Number of outputs: 8 (OUT1 to OUT8)
• Operating temperature: 0 to +50°C, no freezing
• Relative humidity: 35 to 85% RH, no condensation
• Material: PC main case, PA/POM power connector, PA I/O connector, zinc with Ni plating sensor head connector, copper alloy with Ni plating Ethernet connector, aluminum heat sink, POM DIN rail tab, PC nameplate
• Weight: Approx. 330 g

Key Performance Highlights

• 16 detection tools plus 1 position adjustment tool handle varied inspection jobs.
• SD card support expands stored programs to 128 switch settings.
• Eight inputs and eight outputs give direct control over line signals.
• Open collector outputs switch between NPN and PNP for easy integration.
• Built-in Ethernet covers EtherNet/IP, PROFINET, and TCP/IP communication.
• Optional DL Series units add EtherCAT, CC-Link, DeviceNet, PROFIBUS, and RS-232C.

Installation Guide

• Mount the IV2-G30 on a DIN rail or flat panel inside the cabinet.
• Keep the rear aluminum heat sink clear for proper airflow.
• Connect the sensor head with the dedicated cable and confirm the lock.
• Wire the 24 VDC supply within the ±10% tolerance range.
• Set the output type to NPN or PNP before you wire field devices.
• Plug the RJ45 cable into the 8-pin connector for network access.

Environmental and Interference Resistance

• The aluminum heat sink keeps performance stable during long shifts.
• Operating temperature of 0 to +50°C suits most control cabinet conditions.
• Humidity tolerance of 35 to 85% RH covers common plant environments.
• Nickel-plated connectors resist corrosion on the sensor head link.
• Shielded Ethernet connectors reduce noise on the network line.

Packaging List

• 1 x IV2-G30 sensor amplifier
• 1 x Power connector
• 1 x I/O connector
• 1 x Quick start guide

Shipping and Support

• We ship orders within 5 days after payment confirmation.
• We use FedEx, UPS, and DHL for international delivery.
• We accept returns within 30 days of delivery.
• All units ship as brand new and original stock.

FAQ

• How many detection tools does the IV2-G30 offer? The unit provides 16 detection tools plus 1 position adjustment tool.
• How many programs can the IV2-G30 store? It stores 128 programs with an SD card and 32 programs without one.
• What output type does this amplifier use? It uses open collector outputs with NPN/PNP and N.O./N.C. switching.
• How many inputs and outputs does the IV2-G30 have? The unit offers 8 inputs and 8 outputs.
• What is the maximum output rating? The maximum rating is 26.4 V at 50 mA.
• What is the power requirement of this amplifier? The unit needs 24 VDC ±10% and draws 1.8 A or less.
• Which protocols does the IV2-G30 support? It supports EtherNet/IP, PROFINET, TCP/IP non-procedure comm, FTP client, and SNTP client.
• What is the weight of the IV2-G30? The amplifier weighs approximately 330 g.
• How do you ship orders? We ship within 5 days via FedEx, UPS, or DHL.
• What is the return policy? We accept returns within 30 days of delivery.

Contact Information

• Inquiries: sales@nex-auto.com
• Phone/WhatsApp: +86 153 9242 9628
• Partner NexAuto Technology Limited: https://www.nex-auto.com/