IC695PSD040 GE Fanuc RX3i Power Supply 40W DC

IC695PSD040 Power Supply Module for PACSystem RX3i

• Brand: GE Fanuc
• Model: IC695PSD040
• Category: Power Supply Module
• Output Power: 40 Watts maximum total
• Nominal Rated Voltage: 24 VDC
• Input Voltage (Start): 18 to 30 VDC
• Input Voltage (Run): 12 to 30 VDC
• Maximum Input Power: 60 Watts at full load
• Output Voltages: 5.1 VDC, 3.3 VDC, and user 24 VDC
• Output Current: 5.1 VDC = 0 to 6 Amps; 3.3 VDC = 0 to 9 Amps
• Maximum Output per Rail: 30 Watts for 5.1 VDC or 3.3 VDC
• Ride Through Time: 10 ms during power loss
• Inrush Current: 4 Amps for 100 milliseconds maximum
• Ripple: 50 mV
• Isolation: None (non-isolated design)
• LED Indicators: Power, P/S Fault, Overtemperature, Overload
• On/Off Switch: Yes, on the front panel
• Wiring Terminals: 14 AWG to 18 AWG wire
• Terminal Current: 6 Amps

Frequently Asked Questions (FAQ)

• Q: Can I use two IC695PSD040 modules for redundancy?
  A: No. IC695PSD040 does not support power supply redundancy.
• Q: What happens if my backplane needs more than 40 Watts?
  A: You must move some modules to a separate backplane.
• Q: Does daisy chaining two PSD040 units increase power?
  A: No. Daisy chaining does not raise the 40 Watt total output.
• Q: What wire size works for the DC input terminals?
  A: Use 14 AWG to 18 AWG copper wire only.
• Q: Is the 24 VDC output isolated from other rails?
  A: No. IC695PSD040 provides no isolation on any output.
• Q: Can this module power relay output circuits?
  A: Yes. Use the 24 VDC user output for relay modules.
• Q: What is the ride through time during input loss?
  A: The module provides 10 ms of ride through time.
• Q: Do you offer international shipping?
  A: Yes. We ship worldwide via FedEx, UPS, or DHL.

For inquiries, contact us at sales@nex-auto.com or +86 153 9242 9628 (WhatsApp). Partner NexAuto Technology Limited: https://www.nex-auto.com/