EVS9323-ESV004 Lenze Servo Inverter 9300 Global Drive

EVS9323-ESV004 Lenze Global Drive 9300 Servo Inverter

Technical Specifications

• Brand: Lenze
• Model: EVS9323-ESV004
• Series: Global Drive 9300 Servo Inverters
• Rated motor power: 1.5 kW for 4-pole asynchronous motors at 400 V
• Rated output current: 3.9 A nominal at 8 kHz switching frequency
• Maximum output current: 5.9 A at 8 kHz in overload mode, equal to 150 % of nominal current
• Control method: Field-oriented servo control for synchronous and asynchronous servo motors plus standard asynchronous motors
• Analog inputs: 2 channels at ±10 V, switchable to 0…20 mA, 11 bits plus sign
• Analog outputs: 2 channels with 9 bits plus sign
• Digital inputs: 6 total, one controller enable plus five freely assignable, PLC level per IEC 61131-2
• Digital outputs: 4 outputs rated 50 mA each
• Resolver input: Sub-D 9-pin connector
• Encoder input: Multi-encoder port for TTL/SinCos incremental encoders and Hiperface absolute encoders
• Digital frequency input/output: Two-track each on Sub-D 9-pin
• Supply voltage: 3/PE AC 320…528 V nominal at 45…65 Hz, with alternative DC 460…740 V supply
• Power loss at 400 V: 140 W
• Operating temperature: 0…+55 °C ambient for sizes 9321–9326 (0.37–11 kW)
• Current derating: 2.5 % per °C above +40 °C, not UL-approved
• Storage temperature: -25…+55 °C
• Relative humidity: Average 85 % RH without condensation, climatic class 3K3 per EN 50178
• Protection rating: IP20
• Dimensions (H×W×D): 350×97×250 mm for the built-in/push-through design
• Weight: 5.0 kg

Communication and Signal Quality

• Built-in ports: CAN system bus (X4) and AIF automation interface (X1) for keypad or communication module
• Integrated protocol: CANopen runs directly on the system bus
• AIF slot modules: PROFIBUS DP (EMF2133IB), DeviceNet (EMF2179IB), INTERBUS (EMF2113IB) and LECOM A/B (EMF2102IB)
• Anti-interference design: Shielded analog and digital interfaces hold stable signals inside industrial cabinets
• Resolution: 11-bit plus sign analog input resolution supports fine speed and torque reference setting

Installation Guide

• Mount the inverter vertically inside a control cabinet and leave enough clearance for airflow.
• Connect the 3/PE AC supply within 320…528 V and confirm the 45…65 Hz line frequency.
• Wire the resolver or encoder to the Sub-D 9-pin input before you apply power.
• Feed the controller enable signal to the first digital input and assign the remaining five inputs.
• Keep ambient temperature at or below +40 °C for full current, or derate 2.5 % per °C above it.
• Link the drive to your automation network through CANopen or an AIF module.

Package Contents

• 1 × Lenze EVS9323-ESV004 servo inverter
• 1 × printed terminal assignment and wiring diagram
• 1 × Sub-D 9-pin connector set for resolver and encoder inputs
• 1 × mounting hardware kit
• Protective packaging for safe transport via FedEx, UPS or DHL

Lifecycle and Migration

• Lenze lists this unit on its official previous products page as a legacy drive.
• Newer drive generations replace the Global Drive 9300 series over time.
• Lenze confirms an official migration path to the i950 servo drive.
• The i950 replicates 9300 servo behaviour through a compatibility switch, PROFIBUS module and L_ICIP library.
• No drop-in replacement shares the same order code, so plan the upgrade carefully.

FAQ

• Q: What output current does the EVS9323-ESV004 deliver?
  A: It provides 3.9 A nominal at 8 kHz and reaches 5.9 A in overload mode.
• Q: Which encoder types work with this inverter?
  A: It accepts TTL/SinCos incremental encoders, Hiperface absolute encoders and resolvers.
• Q: What supply voltage does the drive require?
  A: It runs on 3/PE AC 320…528 V at 45…65 Hz, or on DC 460…740 V.
• Q: What is the operating temperature range?
  A: The unit works from 0 to +55 °C ambient with 2.5 % derating per °C above +40 °C.
• Q: Which communication protocols does it support?
  A: CANopen is integrated, and AIF modules add PROFIBUS DP, DeviceNet, INTERBUS or LECOM A/B.
• Q: What are the protection rating and weight?
  A: The housing offers IP20 protection and the unit weighs 5.0 kg.
• Q: Is the product new and in stock?
  A: Yes, we offer brand new original units and keep them in stock now.
• Q: How fast do you ship and which carriers do you use?
  A: We ship within 5 days through DHL, FedEx or UPS.
• Q: Can I return the product?
  A: Yes, we support returns within 30 days of delivery.

Contact Information Inquiries: sales@nex-auto.com or +86 153 9242 9628 for pricing and stock details.

Partner NexAuto Technology Limited