DS500-P411 SICK Dx500 Short Range Laser Sensor

SICK DS500-P411 Dx500 Short Range Laser Sensor with Built-in Heater for Cold Environments

Technical Specifications of the DS500-P411

• Brand: SICK
• Model: DS500-P411
• Series: Dx500 Short Range
• Part Number: 1040478
• Measurement Principle: Pulsed optical laser time-of-flight distance measurement
• Measuring Range: 0.2 m to 7 m at 90% white remission; 0.8 m to 7 m at 6% black remission
• Light Source: Visible red laser diode, 650 nm wavelength, average optical power below 1 mW
• Laser Class: Class 2 per IEC 60825-1:2014 and EN 60825-1:2014
• Response Time: 150 ms in fast short-range mode
• Repeatability: 3 mm to 5 mm
• Measurement Accuracy: Typically ±3 mm to ±10 mm
• Switching Hysteresis: Adjustable from 10 mm to 100 mm
• Switching Frequency: Up to 4 Hz
• Digital Outputs: 2x PNP switching outputs at ≤100 mA
• Multifunctional Input: 1x PNP MF input
• Supply Voltage: DC 24 V nominal, 18 V to 30 V range, reverse-polarity protected
• Power Consumption: Typically 22 W to 30 W with heater active
• Electrical Connection: M12 male connector, 8-pin
• Operating Temperature: -40 °C to +45 °C with integrated heating system active
• Storage Temperature: -25 °C to +75 °C
• Enclosure Rating: IP65 per EN 60529
• Dimensions (W x H x D): 69 mm x 50 mm x 153 mm
• Housing Material: Heavy-duty aluminum die-cast housing
• Weight: Approx. 1,000 g

Key Performance Highlights

• The DS500-P411 delivers short-range high-precision readings up to 7 m without a reflector.
• High optical output power keeps results stable on dark and uncooperative surfaces.
• The built-in thermostat-controlled heater supports outdoor and cold-storage operation to -40 °C.
• The cast aluminum housing resists severe industrial vibration and impact.
• Typical targets include hot slabs, metal coils, coal, and paper rolls.
• The 150 ms fast short-range mode speeds up control loop response.

Installation Guide

• Mount the sensor on a rigid bracket to reduce vibration error during measurement.
• Keep the laser beam perpendicular to the target for the best accuracy.
• Connect the 8-pin M12 connector to a DC 24 V supply with correct polarity.
• Allow the internal heater to warm the unit before you start measurement in cold areas.
• Wire the two PNP switching outputs to your controller within the 100 mA limit.
• Set hysteresis and switching points to match your process tolerance.
• Keep the front window clean so the IP65 rating and optical performance stay intact.

Packing List

• 1x SICK DS500-P411 distance sensor
• 1x M12 8-pin connector or compatible cable option
• 1x Printed quick start guide
• 1x Protective packaging for safe transport

Shipping and Support

• We ship with FedEx, UPS, and DHL according to your delivery needs.
• Our stock is ready and we dispatch orders within 5 days.
• We accept returns within 30 days under our standard policy.
• All units are brand new and original from the manufacturer.

FAQ

• Q: What is the measuring range of the DS500-P411?
  A: It measures 0.2 m to 7 m on 90% white remission and 0.8 m to 7 m on 6% black remission.
• Q: How does the built-in heater help in cold sites?
  A: The thermostat-controlled heater keeps the sensor working down to -40 °C in outdoor and cold-storage sites.
• Q: What response time does this Dx500 sensor offer?
  A: It offers 150 ms in fast short-range mode for quicker control loop feedback.
• Q: How accurate and repeatable is the measurement?
  A: Typical accuracy is ±3 mm to ±10 mm, and repeatability is 3 mm to 5 mm.
• Q: Which output type and connector does it use?
  A: It provides two PNP switching outputs and one PNP MF input through an 8-pin M12 connector.
• Q: What supply voltage and power consumption should I expect?
  A: It runs on DC 24 V nominal within 18 V to 30 V and draws 22 W to 30 W with the heater active.
• Q: Is the unit in stock and how fast do you ship?
  A: Yes, we have stock and ship within 5 days via DHL, FedEx, or UPS.
• Q: Can I return the product if it does not fit my application?
  A: Yes, we support returns within 30 days under our standard policy.