DR35-B15822 SICK Dx35 Retro-Reflective Sensor 35 m Range

DR35-B15822 SICK Dx35 Retro-Reflective Sensor – 35 m Range

Technical Specifications

• Brand: SICK
• Model: DR35-B15822
• Series: Dx35 Retro-reflective Switching Sensor
• Measurement Principle: HDDM™ (High Definition Distance Measurement) Optical Time-of-Flight
• Measurement Range: 200 mm to 35,000 mm on Diamond Grade reflective tape
• Light Source: Infrared laser diode, 827 nm wavelength, Class 1 eye-safe per IEC 60825-1:2014
• Laser Class: Class 1 (IEC 60825-1:2014, eye-safe)
• Response Time: Super Fast 2.5 ms / Fast 6.5 ms / Medium 12.5 ms / Slow 24.5 ms / Super Slow 96.5 ms
• Repeatability: ≥ 0.5 mm to 5 mm, speed setting and remission dependent
• Measurement Accuracy: Typically ± 15 mm
• Switching Hysteresis: Adjustable from 0 mm to 34,950 mm
• Switching Frequency: Up to 333 Hz
• Outputs: 2x push-pull (PNP/NPN, Q1 and Q2); IO-Link V1.1 on Q1; multifunctional input (MF)
• Supply Voltage: DC 12 V to 30 V, reverse-polarity protected; Vs > 18 V when IO-Link is active
• Power Consumption: ≤ 1.7 W at +20 °C, without load, speed setting Slow
• Electrical Connection: Male connector M12, 5-pin
• Ambient Temperature: Operation -30 °C to +55 °C; storage -40 °C to +75 °C
• Enclosure Protection Rating: IP65 (EN 60529)
• Dimensions: 32 mm x 58.6 mm x 42.7 mm (W x H x D)
• Housing Material: Plastic (ABS/PC) with acrylic glass (PMMA) optical window
• Device Weight: Approx. 65 g

Key Features and Functional Highlights

• Dual digital switching outputs with an eye-safe Class 1 infrared laser
• Long-range detection on reflective tape up to 35 m
• Optical alignment aid for precise targeting during commissioning
• IO-Link V1.1 parameterization and status reporting for smart diagnostics
• Five speed settings and adjustable hysteresis match many detection tasks

Installation Guide

• Mount the sensor firmly and place Diamond Grade reflective tape at the far end
• Keep the PMMA optical window clean to protect measurement accuracy
• Align the device with the optical alignment aid before final tightening
• Respect the 200 mm minimum distance to the reflective tape
• Connect the M12 5-pin male connector and verify the pin assignment
• Use a shielded cable in electrically noisy areas to protect signal quality
• Set speed, hysteresis and output mode through IO-Link or the teach function

Packaging List

• 1x SICK DR35-B15822 sensor, part number 1057660
• 1x quick start guide and mounting instructions
• 1x protective packaging for safe transport

FAQ

• Q: What is the maximum measuring range?
  A: The sensor reaches 35,000 mm when it works against Diamond Grade reflective tape.
• Q: How accurate is the measurement?
  A: Typical measurement accuracy is ± 15 mm across the working range.
• Q: How fast does the sensor respond?
  A: Response time starts at 2.5 ms in Super Fast mode and reaches 96.5 ms in Super Slow mode.
• Q: Does this model support IO-Link?
  A: Yes, it supports IO-Link V1.1 on output Q1 and needs a supply above 18 V.
• Q: Is the laser eye-safe?
  A: Yes, the 827 nm infrared laser meets Class 1 requirements under IEC 60825-1:2014.
• Q: What is the enclosure rating?
  A: The housing carries an IP65 rating under EN 60529 for dusty and wet conditions.
• Q: What connector does it use?
  A: It uses a 5-pin M12 male connector for electrical connection.
• Q: What is the operating temperature range?
  A: The device operates from -30 °C to +55 °C and stores from -40 °C to +75 °C.
• Q: Is stock available?
  A: Yes, we hold brand-new original stock and ship within 5 days.
• Q: Which shipping methods do you use?
  A: We ship with common carriers such as FedEx, UPS and DHL.
• Q: What is your return policy?
  A: We support returns within 30 days of delivery.

Contact Information

Inquiries: sales@nex-auto.com | +86 153 9242 9628 | Partner NexAuto Technology Limited: https://www.nex-auto.com/