330905-05-13-10-01-05 Bently Nevada 3300 NSv Proximity Probe

Bently Nevada 3300 NSv Proximity Probe – Model 330905-05-13-10-01-05

Key Technical Specifications

• Brand: Bently Nevada.
• Model Number: 330905-05-13-10-01-05.
• Series: 3300 NSv Proximity Probes.
• Linear Range: 1.5 mm (60 mils) from 0.25 mm to 1.75 mm.
• Recommended Gap Setting: 1.0 mm (40 mils).
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) with +12.5%/-20% interchangeability error.
• Deviation from Best Fit Straight Line (DSL): Less than ±0.06 mm (±2.3 mils).
• Frequency Response: 0 to 10 kHz with +0, -3 dB typical.
• Probe Tip Material: Polyphenylene sulfide (PPS).
• Probe Case Material: AISI 304 stainless steel (SST).
• Probe Cable: 75 Ω coaxial FEP insulated cable.
• Total Probe Length: 1.0 meter (39 inches).
• Thread Type: M10X1 without armor.
• Connector Type: Miniature coaxial ClickLoc with connector protector.
• Agency Approval: Multiple Approvals (-05 option).
• Probe DC Resistance (1.0m): 4.2 ± 0.5 ohms.

Environmental & Installation Data

• Operating Temperature: -52°C to +177°C (-62°F to +351°F).
• Storage Temperature: -52°C to +177°C (-62°F to +351°F).
• Maximum Probe Torque: 0.56 N•m (5 in•lb).
• Recommended Torque: Finger tight only.
• Minimum Bend Radius: 25.4 mm (1.0 inch) with or without armor.
• Maximum Thread Engagement Length: 15 mm for M10x1 case.
• Maximum Probe Case Torque: 22.6 N•m (200 in•lb).
• Recommended Case Torque: 7.5 N•m (66 in•lb).
• Target Size Minimum: 8.9 mm (0.35 in) diameter flat target.
• Recommended Target Size: 13 mm (0.5 in) diameter minimum.

Frequently Asked Questions (FAQ)

• Q: Is the 330905-05-13-10-01-05 compatible with older 3300 RAM systems?
  A: Yes. The 3300 NSv Proximity Probes are mechanically and electrically interchangeable with previous 3300 RAM probes.
• Q: Can I use this probe on a shaft smaller than 13 mm?
  A: Yes, but the scale factor may change. Reduce the gap to limit scale factor changes.
• Q: Does the probe come pressure tested from Bently Nevada?
  A: No. Probes do not receive a pressure test before shipment. Contact the custom design department for a pressure seal test.
• Q: What is the maximum field wiring length for this proximity probe?
  A: The maximum length is 305 meters (1000 feet) between the Proximitor Sensor and the monitor.
• Q: Is this a genuine new Bently Nevada probe?
  A: Yes. This unit is brand new, original, and comes in factory packing with a 12-month warranty.
• Q: How do you ship this item?
  A: We use FedEx, UPS, or DHL. Delivery times depend on your location.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/