330904-00-10-10-02-05 3300 NSv Probe Bently Nevada Proximity

3300 NSv Proximity Probe - 330904-00-10-10-02-05

Key Technical Specifications

• Brand & Model: Bently Nevada 3300 NSv (P/N: 330904-00-10-10-02-05).
• Linear Range: 1.5 mm (60 mils) starting at 0.25 mm (10 mils) from the target.
• Recommended Gap: 1.0 mm (40 mils) for standard operation.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) with ±12.5%/-20% interchangeability.
• Deviation from Best Fit Straight Line (DSL): Less than ±0.06 mm (±2.3 mils).
• Frequency Response: 0 to 10 kHz (+0, -3 dB) with up to 305 m of field wiring.
• Probe DC Resistance (RPROBE): 4.2 ± 0.5 ohms for the 1.0 m length.
• Extension Cable DC Resistance: Center 0.220 Ω/m, Shield 0.066 Ω/m.
• Extension Cable Capacitance: 69.9 pF/m typical.
• Operating Temperature: -52°C to +177°C (-62°F to +351°F).
• Storage Temperature: -52°C to +177°C (-62°F to +351°F).
• Probe Tip Material: Polyphenylene sulfide (PPS).
• Probe Case Material: AISI 304 stainless steel.
• Probe Cable: 75 Ω coaxial, FEP insulated, total length 1.0 meter.
• Connector: Miniature coaxial ClickLoc with standard cable (Option 02).
• Agency Approval: Multiple Approvals (Option 05).

Installation & Mechanical Data

• Thread: M8X1 probe case, maximum thread engagement 12 mm.
• Overall Case Length: 100 mm (Option -10-).
• Unthreaded Length: 00 mm.
• Recommended Torque: Finger tight, maximum 0.56 N•m (5 in•lb).
• Connector-to-Connector Torque: Maximum 7.3 N•m (65 in•lb), recommended 5.1 N•m (45 in•lb).
• Minimum Bend Radius: 25.4 mm (1.0 in) with or without stainless steel armor.
• Target Size: Minimum 8.9 mm diameter; recommended 13 mm diameter.
• Pressure Seal: Viton O-ring for differential pressure (not factory tested).

Frequently Asked Questions (FAQ)

• Q: Is this probe compatible with my existing 3300 RAM system?
  A: Yes, the 3300 NSv probe is fully interchangeable with previous 3300 RAM probes.
• Q: What is the recommended gap for this probe?
  A: Bently Nevada recommends a 1.0 mm (40 mils) gap for standard operation.
• Q: Can I use this probe in high-temperature environments?
  A: Yes, it operates from -52°C to +177°C, suitable for harsh industrial conditions.
• Q: How long is the probe cable?
  A: This model includes a 1.0 meter (39 inches) standard coaxial cable.
• Q: What is the maximum field wiring length I can use?
  A: Up to 305 meters (1,000 feet) with proper shielded triad cable.
• Q: Does the probe require special torque during installation?
  A: Finger tight is recommended; maximum torque is 0.56 N•m (5 in•lb).

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628 .

Partner NexAuto Technology Limited : https://www.nex-auto.com/