330903-00-04-10-02-05 Bently Nevada Proximity Probe

330903-00-04-10-02-05 – Bently Nevada 3300 NSv Proximity Probe for Reliable Machine Monitoring

Key Technical Specifications

• Brand & Model: Bently Nevada 330903-00-04-10-02-05 (3300 NSv Probe).
• Thread & Armor: M8X1 thread, without armor.
• Length Configurations: Unthreaded length 00 mm, overall case length 40 mm, total length 1.0 meter (39 inches).
• Connector Type: Miniature coaxial ClickLoc connector with standard cable.
• Agency Approval: Option 05 – Multiple Approvals.
• Probe DC Resistance: 4.2 ± 0.5 ohms from center conductor to outer conductor at 1.0m length.
• Linear Range: 1.5 mm (60 mils) starting from 0.25 mm (10 mils) off target. The range spans 0.25 to 1.75 mm (10 to 70 mils) producing approximately -1 to -13 Vdc.
• Recommended Gap Setting: 1.0 mm (40 mils).
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) with +12.5%/-20% interchangeability error measured in 0.25 mm steps over the linear range.
• Deviation from Best Fit Straight Line (DSL): Less than ±0.06 mm (±2.3 mils).
• Frequency Response: 0 to 10 kHz at +0, -3 dB typical with up to 305 meters (1000 feet) of field wiring.
• Target Size (Flat Target): Minimum 8.9 mm (0.35 in) diameter; recommended minimum 13 mm (0.5 in) diameter.
• Probe Tip Material: Polyphenylene sulfide (PPS).
• Probe Case Material: AISI 304 stainless steel (SST).
• Probe Cable: 75 Ω coaxial with fluoroethylene propylene (FEP) insulation. Total probe lengths available: 0.5, 1, 5, or 7 meters.
• Recommended Torque: Finger tight; maximum torque 0.56 N•m (5 in•lb).
• Minimum Bend Radius: 25.4 mm (1.0 in) with or without SST armor.
• Operating Temperature: -52°C to +177°C (-62°F to +351°F).
• Storage Temperature: -52°C to +177°C (-62°F to +351°F).
• Pressure Sealing: Viton O-ring seals differential pressure between probe tip and case. Probes do not ship pressure tested.
• Connector-to-Connector Torque for M8X1 Case: Maximum rated 7.3 N•m (65 in•lb); recommended 5.1 N•m (45 in•lb).
• Maximum Thread Engagement Length: 12 mm for M8x1 probe case.

Frequently Asked Questions (FAQ)

• Q: Is this 3300 NSv probe compatible with older 3300 RAM systems?
  A: Yes, the 330903-00-04-10-02-05 is mechanically and electrically interchangeable with previous 3300 RAM probes and extension cables.
• Q: What is the output voltage at the recommended 1.0 mm gap?
  A: At 1.0 mm (40 mils) gap, the output voltage falls between -1 and -13 Vdc within the linear range.
• Q: Can I use this probe for high-pressure compressor applications?
  A: Yes, the NSv model offers increased chemical resistance and a Viton O-ring seal. Contact our custom design department if you require a pressure seal test.
• Q: What if my target shaft diameter is smaller than 13 mm?
  A: A smaller shaft diameter may change the scale factor. Reducing the gap between probe and target minimizes this effect.
• Q: What is the total probe cable length and type?
  A: This version comes with a 1.0 meter (39 inch) 75 Ω coaxial FEP insulated cable with a ClickLoc connector.
• Q: Do you have stock and how fast do you ship?
  A: Yes, we have the 330903-00-04-10-02-05 in stock. We ship within 5 days using FedEx, UPS, or DHL.

For inquiries or orders, contact us at sales@nex-auto.com or +86 153 9242 9628 (WhatsApp). Partner: NexAuto Technology Limited.