330903-00-04-05-02-00 Bently Nevada 3300 NSv Proximity Probe

Bently Nevada 330903-00-04-05-02-00 Proximity Probe

Core Technical Specifications

• Manufacturer: Bently Nevada (New & Original in Factory Packing)
• Model: 330903-00-04-05-02-00 – 3300 NSv Probe, M8X1 thread, without armor
• Unthreaded Length: 00 mm
• Overall Case Length: 40 mm
• Total Length: 0.5 meter (20 inches) with ClickLoc connector & standard cable
• Agency Approval: -00 = Not required
• Probe DC Resistance (0.5m): 4.0 ± 0.5 Ω (center to outer conductor)
• Linear Range: 1.5 mm (60 mils) from 0.25 to 1.75 mm (10 to 70 mils), approximately -1 to -13 Vdc
• Recommended Gap: 1.0 mm (40 mils)
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) +12.5%/-20% including interchangeability
• Deviation from Best Fit Straight Line (DSL): Less than ±0.06 mm (±2.3 mils)
• Frequency Response: 0 to 10 kHz: +0, -3 dB typical with up to 305 m field wiring
• Target Size (flat): Minimum 8.9 mm diameter; recommended 13 mm diameter
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 304 stainless steel (SST)
• Probe Cable: 75 Ω coaxial, FEP insulated, 0.5m total length

Frequently Asked Questions (FAQ)

• Q: Is the 330903-00-04-05-02-00 a genuine Bently Nevada probe?
  A: Yes, we supply 100% new, original factory-packed units with full traceability.
• Q: Does this probe work with 3300 XL NSv Proximitor Sensors?
  A: Absolutely – it is mechanically and electrically compatible with Bently Nevada 3300 XL NSv systems.
• Q: What is the linear range and recommended gap?
  A: Linear range is 1.5 mm (60 mils) starting at 0.25 mm; we recommend a 1.0 mm (40 mils) gap.
• Q: Can I use this probe in high-temperature environments?
  A: Yes, it operates continuously from -52°C to +177°C without performance degradation.
• Q: What is the frequency response with long field wiring?
  A: It maintains 0 to 10 kHz response with up to 305 meters of field wiring (see Figure 16 & 17).
• Q: Is the probe pressure tested before shipment?
  A: Standard units are not pressure tested; contact our custom design department if you require testing.
• Q: What is the minimum target size for accurate measurement?
  A: Use a flat target at least 8.9 mm diameter; we recommend 13 mm for best results.

Contact Information Inquiries: sales@nex-auto.com ，+86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/