330709-000-230-10-11-00 Bently Nevada Proximity Probe

Bently Nevada 330709-000-230-10-11-00 3300 XL 11 mm Proximity Probe

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330709-000-230-10-11-00
• Series: 3300 XL 11 mm Proximity Probes
• Manufacturer: Bently Nevada
• Product type: 3300 XL 11 mm Proximity Probe
• Probe case thread: M16 x 1.5
• Maximum thread engagement: 24 mm
• Unthreaded length: 000 = 0 mm
• Overall case length: 230 = 230 mm
• Total length: 10 = 1.0 metre (3.3 feet)
• Connector and cable type: 11 = Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable
• Agency approval: 00 = Not required
• Probe DC resistance: 5.9 ± 0.5 ohms from center conductor to outer conductor at 1.0 m
• Probe tip material: Polyphenylene sulfide (PPS)
• Probe case material: AISI 304 stainless steel (SST)
• Probe cable: 75 Ω triaxial, fluoroethylene propylene (FEP) insulated
• Available total probe lengths: 1, 5 or 9 metres
• Minimum bend radius: 25.4 mm (1.0 in) with or without SST armor
• Connector-to-connector torque: Finger tight recommended; maximum 0.565 N•m (5 in•lb)
• Probe case torque: Maximum rated 63.3 N•m (560 in•lb); recommended 21.1 N•m (187 in•lb) for M14x1.5 and M16x1.5 cases
• Operating and storage temperature: -52°C to +177°C (-62°F to +351°F)
• Low-temperature caution: Exposing the probe below -34°C (30°F) may cause premature pressure seal failure
• Cross-talk limitation, flat target: Recommended minimum diameter 30.5 mm (1.2 in)
• Cross-talk limitation, shaft: Recommended minimum diameter 152 mm (6.0 in)
• Made in: U.S.A

Temperature Classification for EPL Ga and Gc

• T1: Ambient temperature -55°C to +232°C
• T2: Ambient temperature -55°C to +177°C
• T3: Ambient temperature -55°C to +120°C
• T4: Ambient temperature -55°C to +80°C
• T5: Ambient temperature -55°C to +40°C

Temperature Classification for EPL Dc

• T280°C @ Ta: Ambient temperature -55°C to +232°C
• T225°C @ Ta: Ambient temperature -55°C to +177°C
• T170°C @ Ta: Ambient temperature -55°C to +120°C
• T130°C @ Ta: Ambient temperature -55°C to +80°C
• T105°C @ Ta: Ambient temperature -55°C to +100°C
• T90°C @ Ta: Ambient temperature -55°C to +40°C

Performance and Environmental Capabilities

• The probe measures shaft vibration and static position through eddy current technology.
• The 75 Ω triaxial FEP cable resists electrical noise and chemical exposure.
• The FluidLoc cable design helps block fluid ingress along the cable path.
• The PPS tip and AISI 304 stainless steel case handle harsh industrial conditions.
• The wide temperature range supports both storage and operating demands.
• The low probe DC resistance supports stable signal transmission over 1.0 metre.
• The M16 x 1.5 thread allows secure mounting in standard probe holders.
• The miniature coaxial ClickLoc connector enables fast, repeatable connections.

Installation Guide

• Verify the target material and surface finish before mounting the probe.
• Keep the flat target diameter at or above 30.5 mm (1.2 in).
• Keep the shaft diameter at or above 152 mm (6.0 in) to limit cross-talk.
• Engage the M16 x 1.5 thread no deeper than 24 mm.
• Tighten the probe case to 21.1 N•m (187 in•lb) as the recommended torque.
• Never exceed 63.3 N•m (560 in•lb) on the probe case.
• Hand-tighten the connector, then cap torque at 0.565 N•m (5 in•lb).
• Respect a minimum bend radius of 25.4 mm (1.0 in) on the cable.
• Avoid temperatures below -34°C (30°F) to protect the pressure seal.
• Route the cable away from high-voltage sources to reduce interference.

Package List

• 1 x Bently Nevada 330709-000-230-10-11-00 3300 XL 11 mm Proximity Probe
• 1 x Miniature coaxial ClickLoc connector with protector
• 1 x FluidLoc cable, 1.0 metre total length
• 1 x Protective shipping package

Shipping and Support

• We ship with FedEx, UPS, and DHL according to your delivery preference.
• We dispatch in-stock items within 5 days after order confirmation.
• We support 30-day returns under the stated return conditions.
• We offer new original stock for this Bently Nevada probe model.

FAQ

• Is this probe new and original? Yes, we supply new original stock for the 330709-000-230-10-11-00.
• Do you have this item in stock? Yes, we keep this Bently Nevada probe in stock when listed as available.
• How fast do you ship? We ship within 5 days after we confirm your order.
• Which couriers do you use? We use FedEx, UPS, and DHL for international delivery.
• Can I return the probe? Yes, we support returns within 30 days under the stated conditions.
• What is the probe total length? This model uses a 1.0 metre (3.3 feet) total length.
• What is the probe DC resistance? The resistance is 5.9 ± 0.5 ohms from center conductor to outer conductor.
• What is the operating temperature range? The range is -52°C to +177°C (-62°F to +351°F).
• What thread does the probe case use? The case uses an M16 x 1.5 thread with 24 mm maximum engagement.
• What is the minimum bend radius? The minimum bend radius is 25.4 mm (1.0 in).
• What connector does this probe use? It uses a miniature coaxial ClickLoc connector with protector.
• What cable type does this probe use? It uses a 75 Ω triaxial FEP FluidLoc cable.

Contact Information

• Inquiries: sales@nex-auto.com
• Phone/WhatsApp: +86 153 9242 9628
• Partner NexAuto Technology Limited: https://www.nex-auto.com/