330709-000-040-50-01-00 Bently Nevada 3300 XL 11 mm

Bently Nevada 330709-000-040-50-01-00 Proximity Probe Introduction

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330709-000-040-50-01-00
• Series: 3300 XL 11 mm Proximity Probes
• Product Type: 3300 XL 11 mm Probe, M16 x 1.5 thread, without armor
• Unthreaded Length: 000 = 0 mm
• Overall Case Length: 040 = 40 mm
• Total Length: 50 = 5.0 metres (16.4 feet)
• Compatibility Note: Five metre probes pair only with the five metre Proximitor Sensor
• Connector and Cable Type: 01 = Miniature coaxial ClickLoc connector with connector protector, standard cable
• Agency Approval: 00 = Not required
• Probe DC Resistance: 7.2 ± 0.8 ohms from center conductor to outer conductor at 5.0 m
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 304 stainless steel (SST)
• Probe Cable: 75 Ω triaxial, fluoroethylene propylene (FEP) insulated cable
• Minimum Bend Radius: 25.4 mm (1.0 in) with or without SST armor
• Probe Case Thread: M16 x 1.5
• Maximum Thread Engagement: 24 mm

Temperature Range and Environmental Tolerance

• Operating and Storage Temperature: -52°C to +177°C (-62°F to +351°F)
• Low Temperature Caution: Exposing the probe below -34°C (30°F) may cause premature pressure seal failure
• EPL Ga and Gc, T1: Ambient temperature -55°C to +232°C
• EPL Ga and Gc, T2: Ambient temperature -55°C to +177°C
• EPL Ga and Gc, T3: Ambient temperature -55°C to +120°C
• EPL Ga and Gc, T4: Ambient temperature -55°C to +80°C
• EPL Ga and Gc, T5: Ambient temperature -55°C to +40°C
• EPL Dc, T280°C @ Ta: Ambient temperature -55°C to +232°C
• EPL Dc, T225°C @ Ta: Ambient temperature -55°C to +177°C
• EPL Dc, T170°C @ Ta: Ambient temperature -55°C to +120°C
• EPL Dc, T130°C @ Ta: Ambient temperature -55°C to +80°C
• EPL Dc, T105°C @ Ta: Ambient temperature -55°C to +100°C
• EPL Dc, T90°C @ Ta: Ambient temperature -55°C to +40°C

Cross-talk and Target Size Limits

• Target Size for Flat Surface: Recommended minimum 30.5 mm (1.2 in) diameter
• Shaft Diameter: Recommended minimum 152 mm (6.0 in)
• Cross-talk Limitation: The probe keeps reliable signal separation when you follow these target and shaft size guidelines

Installation Guidelines

• Mount the probe with an M16 x 1.5 thread and keep thread engagement within 24 mm
• Apply 21.1 N·m (187 in·lb) as the recommended probe case torque
• Never exceed 63.3 N·m (560 in·lb) as the maximum rated probe case torque
• Tighten the connector-to-connector joint by hand until finger tight
• Keep the maximum connector torque below 0.565 N·m (5 in·lb)
• Respect the 25.4 mm (1.0 in) minimum bend radius during cable routing
• Protect the probe from temperatures below -34°C (30°F) to avoid pressure seal damage
• Use this 5.0 metre probe only with the matching five metre Proximitor Sensor

Package List

• One Bently Nevada 330709-000-040-50-01-00 proximity probe
• One miniature coaxial ClickLoc connector with connector protector and standard cable
• Protective packaging for safe transport
• Product identification label with model information

Shipping and Support

• Stock: We keep this item in stock for immediate order processing
• Dispatch: We ship within 5 days after order confirmation
• Couriers: FedEx, UPS, and DHL
• Returns: We support returns within 30 days
• Condition: Brand new and original

FAQ

• Q: What is the probe DC resistance for this model?
  A: The 330709-000-040-50-01-00 shows 7.2 ± 0.8 ohms from the center conductor to the outer conductor at 5.0 m.
• Q: Which thread size does this probe use?
  A: It uses an M16 x 1.5 thread with a maximum thread engagement of 24 mm.
• Q: What is the maximum probe case torque?
  A: The maximum rated torque is 63.3 N·m (560 in·lb), while the recommended torque is 21.1 N·m (187 in·lb).
• Q: Which Proximitor Sensor works with this 5.0 metre probe?
  A: This probe works only with the five metre Proximitor Sensor.
• Q: What connector and cable type does this probe include?
  A: It includes a miniature coaxial ClickLoc connector with connector protector and a standard cable.
• Q: Does this model require agency approval?
  A: No, the 00 option means agency approval is not required.
• Q: What is the operating temperature range?
  A: The operating and storage temperature range is -52°C to +177°C (-62°F to +351°F).
• Q: How long is the total probe length?
  A: The total length is 5.0 metres (16.4 feet).
• Q: Do you ship internationally?
  A: Yes, we ship with FedEx, UPS, and DHL, and we dispatch within 5 days.

Contact Information

• Email: sales@nex-auto.com
• WhatsApp: +86 153 9242 9628
• Partner: NexAuto Technology Limited