330104-05-10-50-02-RU Bently Nevada 3300 XL 8mm Probe 5m

Bently Nevada 330104-05-10-50-02-RU 3300 XL 8 mm Proximity Probe

• Manufacturer: Bently Nevada – a leader in condition monitoring.
• Model Number: 330104-05-10-50-02-RU specifies all configuration options.
• Unthreaded Length: 50 mm (option 05) for flexible installation.
• Overall Case Length: 100 mm (option 10) ensures proper fit.
• Total Cable Length: 5.0 meters (16.4 feet) with option 50. Note: 5-meter probes are designed for use with the 5 meter Proximitor sensor only.
• Connector Type: Miniature coaxial ClickLoc connector with standard cable (option 02).
• Agency Approval: Country Specific (option RU).

Technical Specifications

• Linear Range: 2 mm (80 mils). The range starts at 0.25 mm (10 mils) from target and extends to 2.3 mm (90 mils). The output spans approximately –1 to –17 Vdc over this range.
• Recommended Gap Setting: For radial vibration, set to -9 Vdc, which equals about 1.27 mm (50 mils).
• Probe Tip Material: Polyphenylene sulfide (PPS) offers excellent durability.
• Probe Case Material: AISI 303 or 304 stainless steel (SST) resists corrosion.
• Probe DC Resistance: 8.73 ± 0.50 Ω across the 5.0 meter length.
• Temperature Range (Standard): -52°C to +177°C (-62°F to +350°F).
• Temperature Range (Extended): Probe tip handles -52°C to +218°C (-62°F to +425°F). The cable and connector withstand -51°C to +260°C (-60°F to +500°F). Note that exposing the probe below –34˚C (-30˚F) may damage the pressure seal.
• Relative Humidity: Shows less than 3% change in Average Scale Factor (ASF) after 56 days at 93% humidity per IEC 68-2-3.
• Pressure Seal: Uses a Viton® O-ring to seal differential pressure between the tip and case.

Electrical and Wiring Details

• Field Wiring: Use 0.2 to 1.5 mm² (16 to 24 AWG) wire. We recommend a 3-conductor shielded triad cable with tinned conductors.
• Maximum Cable Length: 305 meters (1,000 feet) between the 3300 XL Proximitor Sensor and the monitor. Longer wiring reduces high-frequency response; refer to frequency response graphs for signal rolloff.
• Intrinsic Safety (ia): The 330104-05-10-50-02-RU supports Class I, Zone 0 (AEx/Ex ia IIC T5...T1 Ga) when installed with zener barriers per drawing 141092 or with galvanic isolators. Also covers Class I, Groups A-D; Class II, Groups E-G; and Class III.
• Non-incendive (nA/ec): Supports Class I, Zone 2 (AEx/Ex nA IIC T5…T1 Gc) and Class I, Division 2 Groups A-D when installed with nonincendive circuits per drawing 140979. Also meets AEx/Ex ec IIC T5…T1 Gc.

Installation and Mechanical Data

• Probe Case Thread: M10 x 1, with a maximum thread engagement of 15 mm.
• Weight: 323 g/m (11.4 oz per meter), ensuring a lightweight yet robust design.
• Operating and Storage: Standard probe works from -52°C to +177°C. The extended temperature version reaches higher ranges as noted above.
• Humidity Endurance: Withstands 93% humidity for up to 56 days with minimal effect on scale factor.

Package Contents

• One 3300 XL 8 mm Proximity Probe (model 330104-05-10-50-02-RU).
• Integrated coaxial cable with ClickLoc connector.
• Installation and mounting accessories (where applicable).

Shipping and Logistics

• We ship all orders within 5 business days.
• We use FedEx, UPS, or DHL for fast and reliable delivery.
• We hold stock for immediate dispatch.
• Every unit is brand new and original.

Frequently Asked Questions

• Q: Is this probe brand new and original?
  A: Yes, all units are brand new and genuine Bently Nevada products.
• Q: What is the typical lead time for shipment?
  A: We ship within 5 days after order confirmation.
• Q: Which carriers do you use for shipping?
  A: We use FedEx, UPS, and DHL for global deliveries.
• Q: What is the return policy?
  A: We accept returns within 30 days of receipt.
• Q: What is the recommended gap setting for radial vibration?
  A: Set the gap to -9 Vdc, which corresponds to approximately 1.27 mm (50 mils).
• Q: What does the "RU" approval option mean?
  A: "RU" indicates Country Specific approval, tailored for regional regulatory requirements.
• Q: What is the maximum field wiring length?
  A: The maximum length is 305 meters (1,000 feet) between the Proximitor and monitor.
• Q: Why does this probe have a 5-meter cable?
  A: This 5.0 meter cable length is specifically designed for use with the 5 meter Proximitor sensor.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/