330102-00-24-50-02-00 Bently Nevada 3300 XL Proximity Probes

Bently Nevada 330102-00-24-50-02-00: 3300 XL 8 mm Proximity Probe

• Linear Range: 2 mm (80 mils). The range starts at 0.25 mm (10 mils) from the target. It extends from 0.25 to 2.3 mm (10 to 90 mils). This corresponds to approximately –1 to –17 Vdc.
• Recommended Gap Setting for Radial Vibration: -9 Vdc. This equals approximately 1.27 mm (50 mils).
• Nominal Probe DC Resistance (RPROBE): 8.73 ± 0.50 Ω for a 5.0 meter probe length. This measurement applies from center conductor to outer conductor.
• Field Wiring: Use 0.2 to 1.5 mm² (16 to 24 AWG) wiring. We recommend 3 conductor shielded triad cable with tinned wiring. The maximum length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet).

Environmental and Mechanical Specifications

• Probe Temperature Range (Standard): -52°C to +177°C (-62°F to +350°F) for operating and storage. Exposing the probe below –34˚C (-30˚F) may cause premature pressure seal failure.
• Extended Temperature Range Probe: -52°C to +218°C (-62°F to +425°F) for the probe tip. The probe cable and connector operate from -51°C to +260°C (-60°F to +500°F).
• Probe Relative Humidity: Less than a 3% change in Average Scale Factor (ASF) at 93% humidity. This complies with IEC standard 68 2 3 for up to 56 days.
• Probe Pressure Design: The 3300 XL 8 mm probe seals differential pressure between tip and case. The seal uses a Viton® O-ring. Bently Nevada does not pressure test probes before shipment.
• Thread Engagement Limits: The probe case thread is 3/8-24. The maximum thread engagement length is 0.563 inches.
• Probe Weight: 323 g/m (11.4 oz).

Frequently Asked Questions (FAQ)

• Is the 330102-00-24-50-02-00 a genuine Bently Nevada product?
  Yes, we supply a brand new, original Bently Nevada 3300 XL 8 mm Proximity Probe. It is factory-sealed and meets all OEM specifications.
• What is the linear range of this 3300 XL 8 mm probe?
  The linear range is 2 mm (80 mils). It begins at approximately 0.25 mm (10 mils) from the target and extends to 2.3 mm (90 mils).
• Why does this 5.0 meter probe require a specific Proximitor sensor?
  The 5.0 meter probe works exclusively with the 5 meter Proximitor sensor. Do not use it with standard Proximitor sensors.
• What is the maximum length for field wiring?
  The maximum length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet).
• What is the operating temperature for the probe tip?
  The standard probe tip operates from -52°C to +177°C (-62°F to +350°F). The extended range tip operates up to +218°C (+425°F).
• Do you have this 3300 XL probe in stock?
  Yes, we keep the 330102-00-24-50-02-00 in our global warehouse. We have stock available for immediate dispatch.
• Does this probe carry hazardous area approvals?
  This specific probe (option 00) has no agency approvals. Contact us if you need CSA, ATEX, or IECEx certified versions.

For inquiries or to place an order, contact us at sales@nex-auto.com or +86 153 9242 9628. Partner: NexAuto Technology Limited