330101-00-49-90-02-05 Bently Nevada 3300 XL 8mm Probe

Bently Nevada 330101-00-49-90-02-05: 3300 XL 8 mm Probe Technical Overview

Key Technical Parameters & Performance

• Brand & Model: Bently Nevada 330101-00-49-90-02-05 (3300 XL 8 mm Probe, non-armored).
• Linear Range: 2 mm (80 mils) starting from 0.25 mm (10 mils) off target, up to 2.3 mm (90 mils). Output spans approximately –1 to –17 Vdc.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ±6.5% for this 9-meter system. This includes interchangeability error over the 80 mil range at 0°C to +45°C.
• Deviation from Best Fit Straight Line (DSL): Less than ±0.038 mm (±1.5 mil) for the 330101-00-49-90-02-05 with components from 0°C to +45°C.
• Nominal Probe DC Resistance: 9.87 ± 0.50 Ω (center conductor to outer conductor) for 9.0m probe length.
• Extension Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical.
• Field Wiring: 0.2 to 1.5 mm² (16 to 24 AWG), 3-conductor shielded triad recommended. Maximum length of 305 meters (1000 feet) between the 3300 XL Proximitor Sensor and monitor.
• Recommended Gap Setting for Radial Vibration: -9 Vdc [approximately 1.27 mm (50 mils)].

Temperature Ranges & Environmental Tolerance

• Probe Operating & Storage Temp (Standard): -52°C to +177°C (-62°F to +350°F).
• Extended Temperature Range Probe: Tip -52°C to +218°C (-62°F to +425°F); cable/connector -51°C to +260°C (-60°F to +500°F).
• Caution: Exposing the probe below –34°C (–30°F) may cause premature seal failure.
• Relative Humidity: Less than 3% change in Average Scale Factor (ASF) when tested at 93% humidity per IEC 68-2-3 for up to 56 days.
• Agency Approvals (Option 05): CSA, ATEX, IECEx. Temperature schedules available for EPL Ga/Gc and Dc environments.

Frequently Asked Questions (FAQ)

• Q: Is the 330101-00-49-90-02-05 a genuine Bently Nevada product?
  A: Yes, it is 100% genuine new original from Bently Nevada, made in U.S.A.
• Q: What is the linear measurement range of this 3300 XL 8 mm Probe?
  A: Its linear range spans 2 mm (80 mils) from 0.25 mm to 2.3 mm gap, output -1 to -17 Vdc.
• Q: Can I use this probe in high-temperature applications?
  A: Yes, standard operating range is -52°C to +177°C. Extended temp probe tip works up to +218°C.
• Q: Does the probe include any armor or FluidLoc option?
  A: This specific model comes without armor and without FluidLoc. FluidLoc is an optional feature for oil leak prevention.
• Q: How long is the total cable length for 330101-00-49-90-02-05?
  A: Total length option 90 = 9.0 meters (29.5 feet) with ClickLoc connector.
• Q: What approvals does this probe carry?
  A: Agency approval option 05 includes CSA, ATEX, and IECEx certifications.
• Q: How soon will you ship?
  A: We ship within 5 days via FedEx, DHL, or UPS. We have this model in stock now.
• Q: What is the recommended torque for installation?
  A: Recommended torque is 11.2 N•m (100 in•lbf) for standard forward mount probes.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628 (WhatsApp)

Partner NexAuto Technology Limited: https://www.nex-auto.com/