330101-00-16-50-02-05 3300 XL Probe Bently Nevada 8 mm

Bently Nevada 330101-00-16-50-02-05 3300 XL 8 mm Probe

• Linear measurement range: 2 mm (80 mils) from 0.25 mm to 2.3 mm (10 to 90 mils). Output spans –1 to –17 Vdc.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ±5% for 5 meter systems. Includes interchangeability error over 0°C to +45°C.
• Recommended radial vibration gap: Set to -9 Vdc, approximately 1.27 mm (50 mils) from the target.
• Probe DC resistance: 8.73 ± 0.50 Ω (center to outer conductor) for the 5.0 meter length.
• Extension cable capacitance: 69.9 pF/m (21.3 pF/ft) typical, preserving signal quality.
• Field wiring: Use 0.2 to 1.5 mm² (16 to 24 AWG) 3-conductor shielded triad cable. Maximum length: 305 meters (1,000 feet) to the monitor.
• Probe tip material: Polyphenylene sulfide (PPS) for robust coil encapsulation.
• Case material: AISI 303 or 304 stainless steel, offering excellent mechanical strength.
• Cable weight: 323 g/m (11.4 oz) for the probe and cable assembly.
• Standard operating temperature: -52°C to +177°C (-62°F to +350°F). Extended tip range: -52°C to +218°C.
• Humidity performance: Less than 3% change in Average Scale Factor after 56 days at 93% RH (IEC 68-2-3).
• Pressure sealing: Viton® O-ring design seals differential pressure. Custom pressure testing available upon request.
• Thread engagement: 3/8-24 UNF, maximum 0.563 in. Torque: max 33.9 N•m, recommended 11.2 N•m.
• Agency approvals: CSA, ATEX, and IECEx (option 05) for hazardous area use.

Frequently asked questions (FAQ)

• Is this probe brand new and original? Yes, we supply 330101-00-16-50-02-05 as factory-sealed, genuine Bently Nevada units.
• Do you have stock available? Yes, we keep this model in stock for immediate orders.
• What is your shipping time? We dispatch within 5 working days via FedEx, UPS, or DHL.
• Can I return the probe? We accept returns within 30 days of delivery.
• What is the maximum field wiring length? Up to 305 meters (1,000 feet) between the Proximitor and the monitor.
• Does the probe handle high humidity? Yes, it passes 93% RH testing with minimal scale factor drift.
• What is the recommended gap for radial vibration? Set the gap to -9 Vdc (approx. 1.27 mm or 50 mils).
• Is the probe pressure-tested before shipping? Not as standard; contact our custom department if you need a pressure seal test.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/