170PNT71000C Schneider Electric Modbus Communication Adapter

170PNT71000C Schneider Electric Modbus Communication Adapter Overview

• Schneider Electric designs the 170PNT71000C for seamless integration into Momentum automation systems. It connects via a standard SUB-D 9-pin port, providing a secure interface for industrial cabling. This adapter supports up to 31 devices in a single segment, offering excellent scalability for expanding facilities.
• The device enables extensive network coverage with a maximum cable length of 5 kilometers. This long-range capability suits large-scale industrial plants and distributed control systems. Operators benefit from the flexibility to position equipment across wide areas without signal degradation.
• Environmental resilience defines the 170PNT71000C with an ambient temperature range of 0 to 40 degrees Celsius. It operates reliably in non-condensing humidity up to 80 percent during use and storage. The adapter also functions at altitudes reaching 1000 meters above sea level.
• Technical specifications confirm the 170PNT71000C uses Modbus communication for straightforward integration. The daisy-chain topology simplifies wiring and reduces installation complexity. This design choice helps maintenance teams quickly troubleshoot and expand networks as needed.

Technical Specifications for 170PNT71000C

• Manufacturer: Schneider Electric mandates rigorous quality control for this communication adapter. The Modicon Momentum series benefits from this proven engineering approach.
• Part Number: 170PNT71000C clearly identifies this specific Modbus interface unit. Always verify this number matches your system requirements before ordering.
• Communication Protocol: Modbus protocol enables reliable data exchange between controllers and field devices. This open standard ensures broad compatibility with industrial equipment.
• Data Rate: 1 Mbit/s transmission speed supports real-time monitoring and control applications. This rate balances speed with signal integrity over long distances.
• Topology: Daisy-chain configuration simplifies network layout and reduces cabling costs. You can easily add or remove devices without disrupting the entire segment.
• Port Type: SUB-D connector with 9 pins provides a rugged and locking interface. This design prevents accidental disconnection in vibration-prone environments.
• Devices Per Segment: Connect up to 31 units in one daisy-chain for flexible system architecture. This capacity suits both small machines and large process lines.
• Cable Length: 5 kilometer maximum reach allows equipment placement far from the controller. This range eliminates the need for signal repeaters in many applications.
• Maximum Ambient Temperature: 40 degrees Celsius operating limit ensures performance in warm control cabinets. Proper ventilation helps maintain this temperature threshold.
• Minimum Ambient Temperature: 0 degrees Celsius startup capability supports unheated storage areas. Allow the unit to warm gradually when moving from cold to warm environments.
• Maximum Operating Humidity: 80 percent non-condensing humidity tolerance protects internal circuits. Avoid exposing the adapter to direct water spray or condensation.
• Maximum Storage Humidity: 80 percent non-condensing level matches operating conditions for consistent reliability. Store the unit in its original packaging to prevent moisture exposure.
• Maximum Operating Altitude: 1000 meters above sea level rating suits most industrial sites. For higher altitudes, consult Schneider Electric for application guidance.

Frequently Asked Questions

• What is the maximum number of devices I can connect with the 170PNT71000C?
  You can connect up to 31 devices in a single daisy-chain segment using this adapter.
• Does the 170PNT71000C support the Modbus protocol at higher speeds?
  This unit specifically supports 1 Mbit/s data rate for reliable long-distance communication.
• Can I use this adapter outdoors or in wet environments?
  The 170PNT71000C requires installation indoors with humidity below 80 percent non-condensing.
• What cable type works best with the SUB-D 9-pin connector?
  Use shielded twisted-pair cable designed for Modbus networks to ensure signal quality.
• How quickly can you ship this communication adapter?
  We process orders within 5 days using FedEx, UPS, or DHL for reliable delivery.
• Do you accept returns on the 170PNT71000C?
  We offer 30-day return privileges on this adapter in its original condition.

Contact Information
Inquiries: sales@nex-auto.com
Phone: +86 153 9242 9628

Partner: NexAuto Technology Limited