150-F970NBED Allen-Bradley SMC Flex Motor Controller 970A

Allen-Bradley 150-F970NBED SMC Flex Smart Motor Controller

Technical Specifications

• Brand: Allen-Bradley
• Model: 150-F970NBED
• Series: SMC Flex
• Controller type: Soft starter
• Enclosure type: Open
• Controller rating: 970 A, 800 Hp @ 460 V AC
• Input line voltage: 200…480 V AC, 3-phase, 50/60 Hz
• Control voltage: 100…120 V AC
• Control options: Brake control
• Rated operating voltage (Ue): 200 V
• Rated control supply voltage: 110 V at 50/60 Hz
• Overload current (line connected): 323 A
• Overload current (delta connected): 400 A
• Trip classes: 10, 15, 20, and 30
• Trip current rating: 117% of motor FLC
• Heatsink fan rating: 150 VA @ 110/120 V AC or 220/240 V AC
• DV/DT protection: RC snubber network for power circuit
• Repetitive peak inverse voltage: 1400 V per UL/CSA/NEMA
• Operating frequency: 50/60 Hz for power circuit
• Line connected motor power (max): 800 Hp @ 460 V AC, 60 Hz, 3-phase
• Delta connected motor power (max): 800 kW @ 500 V AC, 50 Hz, 3-phase
• Rated impulse voltage: 6000 V per IEC
• Dielectric withstand: 2500 V per IEC
• Line connected motor current: 323…970 A @ 600/690 V AC, 3-phase
• Delta connected motor current: 400…1200 A @ 500/575 V AC, 3-phase
• Ampere tested European style (max): Two fuses in parallel 6,6URD33xxx1250 @ 690 V for maximum FLC
• Ampere tested North American style (max): Two fuses in parallel A070URD33xxx1250 @ 690 V for maximum FLC
• Transient protection: Metal oxide varistors: 220 J (optional)
• Insulation voltage: Rated 500 V per IEC
• Rated operational voltage: 200…480 V AC (-15%, +10%) per UL/CSA/NEMA
• Input OFF-state current: <10 mA AC, <3 mA DC for control circuit
• Short-circuit protection device list: Standard fuse, circuit breaker, and high capacity time delay class CC/J/L
• Number of contacts: 1 for auxiliary contacts
• High capacity available fault current (max): 85 kA @ 600 V, maximum current 3000 A time delay Class J or Class L fuse for inside delta connected motors
• Type of current (auxiliary contacts): AC
• Conventional thermal current (Ith): AC/DC 5 A for auxiliary contacts
• Type of control circuit: Electromagnetic relay for auxiliary contacts
• Type of contacts: Programmable NO/NC for auxiliary contacts
• Utilization category: MG 1 per UL/CSA/NEMA for power circuit
• Standard controller feature: Status indication: stopped, starting, stopping, at speed, alarm, and fault
• Standard available fault current (max): 85 kA @ 690 V for maximum FLC
• Optional controller feature: SMB smart motor braking control: provides motor braking without additional equipment, braking current adjustable from 0…400% of motor FLC
• Integrated motor overload protection: True
• Short circuit protection device performance (SCPD) type: Type 1
• Number of sensors (max): 6 for PTC input ratings
• Voltage at PTC terminals (RPTC = open), max: 30 V for PTC input ratings
• Voltage at PTC terminals (RPTC = 4 kΩ), max: <7.5 V for PTC input ratings
• Transformer rating control module: 751 VA (recommended 800 VA)
• Response time: 800 ms for PTC input ratings
• Cold resistance of PTC sensor chain (max): 1500 Ω for PTC input ratings
• Tachometer input: 0…5 V DC @ 4.5 V DC = 100% Speed
• Short circuit trip resistance: 25 Ω ± 10 Ω for PTC input ratings
• Response resistance: 3400 Ω ± 150 Ω for PTC input ratings
• Reset resistance: 1600 Ω ± 100 Ω for PTC input ratings
• Input OFF-state voltage (max): 50 V AC @ 10 V DC / 12 V AC for control circuit
• Input ON-state voltage (min): 85 V AC @ 19.2 V DC / 20.4 V AC for control circuit
• Rated operational current (auxiliary contacts): 3 A @ 120 V AC, 1.5 A @ 240 V AC
• Input ON-state current: 20 mA @ 120 V AC / 40 mA @ 240 V AC, 7.6 mA @ 24 V AC/DC for control circuit
• Contact type: Auxiliary contacts 19/20 (Aux #1), 29/30 (Aux #2), 31/32 (Aux #3), and 33/34 (Aux #4)
• Steady state heat dissipation with control and fan power: 812 W
• Storage and transportation temperature: -20 °C
• Humidity: 5…95% (noncondensing)
• Operating temperature: Open: -5 to 50 °C (23 to 122 °F)
• Protection against electrical shock: IP00 (open device) per IEC for power circuit
• EMC emission levels: Radiated emission: Class A
• EMC immunity levels: Surge transient: per EN/IEC 60947-4-2
• Altitude: 2000 m
• Pollution degree: 2
• Weight: 224 kg
• Shock: Operational: 4 G
• Width: 596.9 mm (23.50 in)
• Depth: 346.2 mm (13.63 in)
• Height: 1041.1 mm (41 in)
• Power pole construction: Heatsink hockey puck thyristor modular design
• Vibration: Operational: 1.0 G peak, 0.15 mm (0.006 in) displacement
• Make: 3600 VA for auxiliary contacts
• Break: 360 VA for auxiliary contacts
• Internal bypass: True
• Function: Single direction
• Power terminal markings: NEMA, CENELEC EN50 012
• Control terminals: Clamping yoke connection, M3 screw clamp
• Line/load side power terminals: Two 13.5 mm (0.53 in) diameter holes per power pole
• Number of poles: 3
• Enclosure: Open type
• Control modules construction: Thermoset and thermoplastic moldings
• Metal parts construction: Plated brass, copper, or painted steel

FAQ

• What is the current rating of this soft starter? The 150-F970NBED handles 970 A and supports 800 Hp at 460 V AC.
• What control voltage does this unit accept? It accepts 100…120 V AC control voltage.
• Does it include brake control? Yes, the brake control option comes included for fast motor stopping.
• Is the enclosure open type? Yes, this controller uses an open type enclosure for panel mounting.
• What input voltage range does it support? It supports 200…480 V AC, 3-phase, 50/60 Hz input.
• Is the product new and original? Yes, we ship brand-new original units from stock.
• How fast do you ship? We dispatch within 5 days using FedEx, UPS, or DHL.
• What is your return policy? We accept returns within 30 days of delivery.

Contact Information Inquiries: sales@nex-auto.com | +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/