IV2-G30F Keyence IV2 Series AI Vision Sensor Amplifier

IV2-G30F Keyence Vision Sensor with Built-in AI Sensor Amplifier

Technical Specifications

• Brand: Keyence
• Model: IV2-G30F
• Series: IV2 Series
• Product type: Sensor amplifier
• Available modes: Learning mode and Standard mode
• Detection tools: 16 tools
• Position adjustment tool: 1 tool
• Switch settings: 128 programs with SD card, 32 programs without
• Image history: 1000 storable images
• Save conditions: NG only, NG and OK near threshold, or All
• Ethernet standard: 100BASE-TX/10BASE-T
• Ethernet connector: RJ45 8-pin connector
• Expanded memory: SD card (SD/SDHC)
• Power voltage: 24 VDC ±10% including ripple
• Current consumption: 1.8 A or less including communication unit and output load
• Network function: FTP client, SNTP client
• Interface compatibility: Ethernet/IP, PROFINET, TCP/IP non-procedure communication
• Communication unit: EtherCAT, CC-Link, DeviceNet, PROFIBUS, RS-232C
• Ambient temperature: 0 to +50°C, no freezing
• Relative humidity: 35 to 85% RH, no condensation
• Material: PC main case, PA/POM power connector, PA I/O connector, zinc with Ni plating sensor head connector, copper alloy with Ni plating Ethernet connector, aluminum heat sink, POM DIN rail tab, PC nameplate
• Weight: Approx. 330 g

Key Performance Highlights

• The built-in AI handles stable detection across changing target conditions.
• 16 detection tools plus 1 position adjustment tool cover complex inspection tasks.
• The unit stores up to 1000 images for traceability and offline review.
• SD card support expands programs to 128 switch settings.
• Built-in Ethernet supports EtherNet/IP, PROFINET, and TCP/IP communication.
• Optional communication units add EtherCAT, CC-Link, DeviceNet, PROFIBUS, and RS-232C.

Installation Guide

• Mount the IV2-G30F on a DIN rail or a flat panel inside the control cabinet.
• Keep the rear heat sink clear of obstructions for proper airflow.
• Connect the sensor head using the dedicated cable and confirm the connector locks.
• Wire the 24 VDC power supply within the ±10% tolerance range.
• Plug the RJ45 Ethernet cable into the 8-pin connector for network access.
• Insert an SD card before powering on when you need expanded program storage.

Environmental and Interference Resistance

• The aluminum heat sink keeps the unit stable during long production runs.
• Operating temperature of 0 to +50°C suits most factory control cabinets.
• Humidity tolerance of 35 to 85% RH covers common plant conditions.
• The zinc and nickel-plated connectors resist corrosion on the sensor head link.
• Built-in Ethernet with shielded connectors reduces signal interference.

Packaging List

• 1 x IV2-G30F sensor amplifier
• 1 x Power connector
• 1 x I/O connector
• 1 x Quick start guide

Shipping and Support

• We ship orders within 5 days after payment confirmation.
• We use FedEx, UPS, and DHL for international delivery.
• We accept returns within 30 days of delivery.
• All units ship as brand new and original stock.

FAQ

• How many detection tools does the IV2-G30F offer? The unit provides 16 detection tools plus 1 position adjustment tool.
• How many programs can the IV2-G30F store? It stores 128 programs with an SD card and 32 programs without one.
• What Ethernet standard does this amplifier use? The unit uses 100BASE-TX/10BASE-T with an RJ45 8-pin connector.
• Which network protocols does the IV2-G30F support? It supports EtherNet/IP, PROFINET, and TCP/IP non-procedure communication.
• What is the power requirement of this amplifier? The unit needs 24 VDC ±10% and draws 1.8 A or less.
• How many images can the IV2-G30F store? The image history holds up to 1000 images.
• What save conditions does the image history offer? You can choose NG only, NG and OK near threshold, or All.
• What is the weight of the IV2-G30F? The amplifier weighs approximately 330 g.
• How do you ship orders? We ship within 5 days via FedEx, UPS, or DHL.
• What is the return policy? We accept returns within 30 days of delivery.

Contact Information

• Inquiries: sales@nex-auto.com
• Phone/WhatsApp: +86 153 9242 9628
• Partner NexAuto Technology Limited: https://www.nex-auto.com/