Skip to product information
1 of 3

GL-VM48LP Keyence Safety Light Curtain Type 4 Body Protection

In stock (15 units), ready to be shipped
  • Vendor:

    Keyence

  • Type:

    Safety Light Curtain

  • Country of Origin:

    USA

  • Dimensions:

    25*15*5cm

  • Weight:

    500 g

  • Tags: Safety light curtain

GL-VM48LP Keyence Safety Light Curtain – Type 4 Body Protection

Technical Specifications

  • Brand: Keyence – Model: GL-VM48LP – Series: GL-V series
  • Protection type: Body protection, Type 4 ESPE/AOPD with optical synchronization
  • Light source: Infrared LED at 850 nm, Exempt Group per IEC62471
  • Number of beam axes: 48; beam axis spacing 40 mm
  • Detection height: 1880 mm; total length 1920 mm
  • Minimum detectable object size: ø45 mm
  • Detecting distance: 0.3 to 15 m
  • Effective angular aperture: up to ±2.5° at 3 m or above
  • Response time: max. 5.8 ms (OSSD, channel 0, ON→OFF)
  • Detection mode: ON when all beam axes receive light
  • Interference prevention: up to 2 units by series connection and switch setting
  • Control output (OSSD): Transistor output x2 (PNP)
  • Supply voltage: 24 VDC -20/+25%, ripple (P-P) 10% or less, Class 2
  • Maximum load current: 150 mA or less
  • Residual voltage (ON): up to 2.5 V (5 m cable); OFF voltage up to 2.0 V (5 m cable)
  • Leakage current: up to 0.8 mA; max. load capacity 0.8 µF; load wiring resistance up to 2.5 Ω
  • Input short-circuit current: approx. 3 mA
  • Current consumption: Transmitter max. 175 mA; Receiver max. 189 mA (OSSD output current not included)
  • Protection circuit: Supply reverse-connection, per-output short-circuit and surge protection
  • Safety standards: IEC61496-1/-2 (Type 4), EN ISO13849-1 (Category 4, PL e), IEC61508 (SIL3), UL60947-1 / CSA C22.2 No.60947-1, UL1998
  • EMC: IEC/EN61496-1, EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
  • Built-in ports: None; Protocols: None; Communication expansion: None

Environmental & Physical Data

  • Operating temperature: -30 to +55 °C (no freezing)
  • Storage temperature: -30 to +70 °C (no freezing)
  • Relative humidity: up to 95 % RH (no condensation)
  • Ambient light: Incandescent lamp 3,000 lux or less; sunlight 20,000 lux or less
  • Protection rating: IP65/IP67 (IEC60529)
  • Overvoltage category: II
  • Vibration resistance: 5 to 150 Hz, 1G, 10 cycles each in X/Y/Z
  • Shock resistance: 15 G, 6 ms pulses, 100 times each in X/Y/Z
  • Material: Main unit aluminum alloy; upper/lower case PPS (GF40%); front cover polycarbonate, SUS304
  • Weight: Transmitter 1250 g; Receiver 1260 g
  • Lifecycle: Active; official Keyence production status confirmed (last verified 2026-09)

Installation Guide

  • Mount the transmitter and receiver facing each other at the correct distance.
  • Keep the detecting distance between 0.3 m and 15 m for stable operation.
  • Align both units so the effective angular aperture stays within ±2.5°.
  • Use optical synchronization; no separate sync cable is required.
  • Connect the 24 VDC supply and wire the two PNP OSSD outputs to your safety relay.
  • Set the series connection switch when you install up to 2 units nearby.
  • Verify the ON state when all 48 beam axes receive light.
  • Check the response time of max. 5.8 ms against your machine stop time.

Package Contents

  • 1x Keyence GL-VM48LP transmitter
  • 1x Keyence GL-VM48LP receiver
  • Mounting brackets and fixing screws
  • Instruction sheet
  • Protective packaging for safe transport
  • Shipping via FedEx, UPS, or DHL

FAQ

  • Q: What is the detection height of the GL-VM48LP?
    A: The detection height is 1880 mm, and the total length is 1920 mm.
  • Q: What minimum object size can this light curtain detect?
    A: It detects objects as small as ø45 mm, which suits body protection.
  • Q: What is the response time?
    A: The OSSD response time is max. 5.8 ms from ON to OFF.
  • Q: Does it support series connection?
    A: Yes, you can connect up to 2 units with the switch setting.
  • Q: What is the operating temperature range?
    A: It works from -30 to +55 °C without freezing.
  • Q: What is the protection rating?
    A: The housing meets IP65/IP67 per IEC60529.
  • Q: What output type does it use?
    A: It provides two PNP transistor OSSD outputs.
  • Q: Is the product new and in stock?
    A: Yes, we offer brand new original units with stock on hand.
  • Q: How fast do you ship?
    A: We ship within 5 days using DHL, FedEx, or UPS.
  • Q: What is your return policy?
    A: We support returns within 30 days.

Fast & Reliable Shipping

Quick worldwide delivery

keeps your automation projects on schedule.

Genuine & Trusted

All components are 100% authentic

ensuring reliable performance for your systems.

  • Express Delivery
  • 12 Months Warranty
  • 30 Days Easy Returns
View Product Details

Customer Support

Get Help When You Need It Most