DS200IPCDG1ABA GE Mark V IGBT P3 DB Snubber Card

DS200IPCDG1ABA – General Electric Mark V IGBT P3 DB Snubber Card

Technical Specifications

• Brand: General Electric
• Model: DS200IPCDG1ABA
• Product Type: IGBT P3 DB Snubber Card
• Series: Mark V
• Connector: One 4-pin connector
• Mounting: Seven screws
• Function: Adjusts insulated bipolar transistors (IGBT)
• Measured Range: Drive-system current control
• Frequency Response: Matches IGBT switching operation
• Sensitivity: Responds to transistor control signals
• Linearity: Stable signal adjustment across the operating band
• Resolution: Fine control of IGBT switching
• Temperature Range: Industrial drive cabinet environment
• Environmental Resistance: Built for dry, clean drive enclosures
• Anti-Interference: Designed for noisy drive power sections

Safety Guidelines for Servicers

• Live Power Assumption: Always assume the drive has power. This habit prevents burns, serious damage, and electric shock. Contact with a live wire can cause death.
• Environmental Safety: Inspect the floor around the drive for moisture. Keep the floor dry and free of dirt, oil, and grease. Discard ungrounded electrical wires because they create a safety hazard.
• Teamwork and Assistance: Never work alone during service. A partner can call for help in an emergency. The partner can also assist during the replacement procedure.
• Power Disconnection: Disconnect the drive from power as one of the first steps. Verify the disconnection before touching any component.
• Qualified Personnel Only: Only qualified servicers should carry out work on this card. The servicer must know how to access the components and how the drive receives power.

Installation Guide

• Disconnect the drive from all power sources before starting.
• Check the work area for moisture, dirt, oil, and grease.
• Locate the snubber card position inside the drive cabinet.
• Remove the seven mounting screws and keep them organized.
• Disconnect the 4-pin connector from the old card.
• Seat the new DS200IPCDG1ABA card in the same position.
• Reconnect the 4-pin connector and tighten the seven screws.
• Verify all connections before restoring power to the drive.

Packing List

• 1 × General Electric DS200IPCDG1ABA IGBT P3 DB Snubber Card
• 1 × 4-pin connector
• 7 × mounting screws
• Protective packaging for safe transport
• Shipping via FedEx, UPS, or DHL

FAQ

• Q: What is the condition of this card?
  A: We supply the DS200IPCDG1ABA as brand new and original.
• Q: Do you have stock available?
  A: Yes, we hold this item in stock for immediate order processing.
• Q: How fast do you ship?
  A: We ship orders within 5 days using common carriers like DHL.
• Q: Can I return the card?
  A: Yes, we support 30-day returns on this product.
• Q: Which drive series uses this card?
  A: The General Electric Mark V series uses this snubber card.
• Q: What does the card adjust?
  A: It adjusts the insulated bipolar transistors (IGBT) in the drive.
• Q: How many screws come with the card?
  A: The card includes seven screws and one 4-pin connector.
• Q: Who should install this card?
  A: Only qualified servicers should install or replace this card.

Contact Information

• Inquiries: sales@nex-auto.com
• Phone / WhatsApp: +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/