330908-00-30-10-01-CN 3300 NSv Proximity Probe Bently Nevada

Bently Nevada 330908-00-30-10-01-CN 3300 NSv Proximity Probe

• Manufacturer: Bently Nevada (part of Baker Hughes).
• Series: 3300 NSv – the next-generation proximity probe.
• Condition: Brand new, original factory packaging.
• Total probe length: 1.0 meter (39 inches) with a miniature coaxial ClickLoc connector and connector protector.
• Agency approval: Country Specific (-CN option).

Key Technical Specifications

• Linear range: 1.5 mm (60 mils) from 0.25 mm to 1.75 mm (10 to 70 mils).
• Recommended gap setting: 1.0 mm (40 mils) for optimal performance.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) with ±12.5%/-20% interchangeability error.
• Deviation from best fit straight line (DSL): Less than ±0.06 mm (±2.3 mils).
• Frequency response: 0 to 10 kHz (-3 dB typical) with up to 305 m of field wiring.
• Probe DC resistance (RPROBE): 4.2 ± 0.5 ohms (center to outer conductor) for 1.0m length.
• Extension cable DC resistance: Center 0.220 Ω/m, Shield 0.066 Ω/m.
• Extension cable capacitance: 69.9 pF/m (21.3 pF/ft) typical.

Environmental & Mechanical Ratings

• Operating temperature: -52°C to +177°C (-62°F to +351°F).
• Storage temperature: Identical range: -52°C to +177°C.
• Probe tip material: Polyphenylene sulfide (PPS) for chemical resistance.
• Probe case material: AISI 304 stainless steel.
• Maximum pressure: Seals differential pressure via Viton O-ring (custom pressure test available).
• Minimum bend radius: 25.4 mm (1.0 in) with or without armor.

Installation & Wiring Guidelines

• Recommended torque: Finger tight (maximum 0.56 N•m / 5 in•lb).
• Connector-to-connector torque (3/8-24): Recommended 7.5 N•m (66 in•lb); max 22.6 N•m (200 in•lb).
• Field wiring: 0.2 to 1.5 mm² (16-24 AWG), three-conductor shielded triad recommended.
• Maximum field wiring length: 305 meters (1,000 feet) between Proximitor and monitor.
• Thread engagement: Maximum 0.563 inch for 3/8-24 UNF probe case.
• Target size (flat): Minimum 8.9 mm diameter; recommended minimum 13 mm.

What's in the Box

• 1 x 3300 NSv probe assembly (330908-00-30-10-01-CN).
• Miniature coaxial ClickLoc connector with connector protector.
• Factory packing with installation instructions.
• No calibration certificate or warranty card included.

Shipping & Returns

• Stock: Available for immediate shipment.
• Dispatch time: Within 5 business days.
• Carriers: FedEx, UPS, DHL (express shipping).
• Return policy: 30-day return window for unused items.

Frequently Asked Questions (FAQ)

• Can I use this probe with existing 3300 RAM extension cables? Yes, the 3300 NSv is mechanically and electrically compatible with previous 3300 RAM probes and cables.
• What is the linear range starting point? The linear range begins at approximately 0.25 mm (10 mils) from the target.
• Does the probe work on small shaft diameters? For shafts under 13 mm, scale factor may change. Reducing gap helps limit this effect.
• Is the probe pressure tested before shipping? Not as standard. Contact our custom design department if you require a pressure seal test.
• What is the temperature classification for hazardous areas? See temperature schedule: T1 to T5 ratings from -55°C to +232°C depending on EPL.
• Is this a genuine Bently Nevada product? Yes, brand new and original in factory packing.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/