330905-05-25-10-12-05 Proximity Probe Bently Nevada Original

Bently Nevada 3300 NSv Proximity Probe Model 330905-05-13-10-01-05

Core Technical Specifications

• Brand & Series: Bently Nevada 3300 NSv Proximity Probes.
• Full Part Number: 330905-05-13-10-01-05.
• Linear Measurement Range: 1.5 mm (60 mils) from 0.25 mm to 1.75 mm.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) with a +12.5%/-20% error range.
• Deviation from Straight Line (DSL): Less than ±0.06 mm (±2.3 mils) for high accuracy.
• Frequency Response: 0 to 10 kHz with a +0, -3 dB typical rolloff.
• Recommended Gap Setting: 1.0 mm (40 mils) for optimal performance.
• Probe Tip Material: Polyphenylene sulfide (PPS) for harsh environments.
• Probe Case Material: AISI 304 stainless steel (SST).

Environmental & Mechanical Limits

• Operating Temperature Range: -52°C to +177°C (-62°F to +351°F).
• Storage Temperature Range: -52°C to +177°C (-62°F to +351°F).
• Maximum Probe Torque: 0.56 N•m (5 in•lb) to avoid damage.
• Minimum Bend Radius: 25.4 mm (1.0 inch) for the probe cable.
• Maximum Thread Engagement: 15 mm for the M10X1 case thread.
• Recommended Case Torque: 7.5 N•m (66 in•lb).
• Maximum Case Torque: 22.6 N•m (200 in•lb) on the first three threads.
• Target Size Minimum: 8.9 mm (0.35 in) diameter for a flat target.
• Pressure Seal: Viton O-ring seals the differential pressure between tip and case.

Electrical & Cable Characteristics

• Probe DC Resistance (1.0m length): 4.2 ± 0.5 ohms.
• Cable Type: 75 Ω coaxial with fluoroethylene propylene (FEP) insulation.
• Total Probe Length Option: 1.0 meter (39 inches) without armor.
• Connector Type: Miniature coaxial ClickLoc with a connector protector.
• Extension Cable Resistance (Center): 0.220 Ω/m (0.067 Ω/ft).
• Extension Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical.
• Maximum Field Wiring Length: 305 meters (1000 feet) to the monitor.

Frequently Asked Questions (FAQ)

• Q: Does the 330905-05-13-10-01-05 work with my existing 3300 RAM extension cable?
  A: Yes. The 3300 NSv Proximity Probes are mechanically and electrically interchangeable with all 3300 RAM probes and cables.
• Q: Can I use this probe on a shaft smaller than 13 mm?
  A: Yes, but the scale factor will change. You must reduce the gap to limit this scale factor change.
• Q: Does Bently Nevada pressure test this probe before shipping?
  A: No. The probe does not receive a pressure test before shipment. You can contact the custom design department for a pressure seal test.
• Q: What is the maximum field wiring length for this proximity probe?
  A: The system supports up to 305 meters (1000 feet) of field wiring between the Proximitor Sensor and your monitor.
• Q: Is this a genuine new Bently Nevada probe?
  A: Yes. This unit is brand new and original. It comes in factory packing with a 12-month warranty.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/