330103-01-06-05-02-00 3300 XL Probe Bently Nevada 0.5m

Bently Nevada 330103-01-06-05-02-00 3300 XL 8 mm Proximity Probe

Key Technical Specifications

• Measurement Range: Linear range spans from 0.25 mm to 2.3 mm (10 to 90 mils).
• Output Signal: Corresponding voltage output ranges from approximately –1 to –17 Vdc.
• Recommended Gap: Set the gap to -9 Vdc, which equals roughly 1.27 mm (50 mils).
• DC Resistance: Nominal probe resistance (RPROBE) is 7.45 ± 0.50 Ω for the 0.5 m length.
• Temperature Range (Standard): Operates from -52°C to +177°C (-62°F to +350°F).
• Humidity Tolerance: Less than 3% change in ASF after 56 days at 93% RH (IEC 68-2-3).
• Thread Size: M10 x 1 thread, maximum engagement length is 15 mm.
• Torque Specifications: Recommended torque is 11.2 N•m (100 in•lbf).

Environmental & Safety Certifications

• Intrinsically Safe (ia): Suitable for Class I, Zone 0; AEx/Ex ia IIC T5...T1 Ga.
• Non-Incendive (nA/ec): Approved for Class I, Zone 2; AEx/Ex nA IIC T5…T1 Gc.
• Temperature Class Schedule: Ranges from T1 (-55°C to +232°C) to T5 (-55°C to +40°C).
• Pressure Seal: Viton® O-ring seals differential pressure between tip and case.

Installation & Wiring Guidelines

• Field Wiring: Use 0.2 to 1.5 mm² (16 to 24 AWG) 3-conductor shielded triad cable.
• Max Cable Length: You may extend up to 305 meters (1,000 feet) between sensor and monitor.
• Frequency Response: Longer wiring may cause signal rolloff at high frequencies—see graphs.
• Thread Engagement: Do not exceed 15 mm for M10x1 probe case thread engagement.
• Mounting Torque: Apply 11.2 N•m (100 in•lbf) for standard forward mount probes.
• Storage Temperature: Store between -52°C and +177°C (-62°F to +350°F).

Frequently Asked Questions (FAQ)

• Is this a genuine Bently Nevada product?
  Yes, we supply 100% new original 330103-01-06-05-02-00 probes from Bently Nevada.
• What is the delivery time?
  We ship within 5 business days after order confirmation via DHL, FedEx, or UPS.
• Can I return the probe if it doesn't fit?
  We accept returns within 30 days of receipt, provided the item is unused.
• What is the maximum field wiring length?
  You can run up to 305 meters (1,000 feet) between the Proximitor and the monitor.
• What torque should I apply for installation?
  Apply 11.2 N•m (100 in•lbf) for standard forward mounted probes.
• Is the probe suitable for high humidity?
  Yes, it withstands 93% relative humidity for 56 days with minimal scale factor shift.

Contact Information Inquiries: sales@nex-auto.com ， +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/